メインコンテンツにスキップ

HP Envy x360 15m-cn0011dx Fan Replacement

必要な工具と部品

  1. HP Envy x360 15m-cn0011dx Fan Replacement, Back Cover: 手順 1、 1の画像 1
    • Flip the laptop over to the back side.

  2. HP Envy x360 15m-cn0011dx Fan Replacement: 手順 2、 2の画像 1 HP Envy x360 15m-cn0011dx Fan Replacement: 手順 2、 2の画像 2
    • Remove the six 5.6 mm screws from the back cover using a Phillips #00 screwdriver.

    • Remove the single 4.3 mm screw in the bottom middle section of the back cover using a T5 Torx screwdriver.

  3. HP Envy x360 15m-cn0011dx Fan Replacement: 手順 3、 1の画像 1
    • Lift the back cover off the laptop.

  4. HP Envy x360 15m-cn0011dx Fan Replacement, Fan: 手順 4、 3の画像 1 HP Envy x360 15m-cn0011dx Fan Replacement, Fan: 手順 4、 3の画像 2 HP Envy x360 15m-cn0011dx Fan Replacement, Fan: 手順 4、 3の画像 3
    • Loosen the four captive screws on the heat sink using a Phillips #00 screwdriver.

  5. HP Envy x360 15m-cn0011dx Fan Replacement: 手順 5、 3の画像 1 HP Envy x360 15m-cn0011dx Fan Replacement: 手順 5、 3の画像 2 HP Envy x360 15m-cn0011dx Fan Replacement: 手順 5、 3の画像 3
    • Remove two 10 mm screws from the fan using a Phillips #00 screwdriver.

  6. HP Envy x360 15m-cn0011dx Fan Replacement: 手順 6、 1の画像 1
    • Unplug the fan from the motherboard and lift the fan and heatsink out of the laptop.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Skylar Moore

メンバー登録日: 08/24/22

688 ポイント

5のガイドは作成済み

チーム

Gateway, Team 1-4, Class Fall 2022 Gateway, Team 1-4, Class Fall 2022人のメンバー

GCC-CLASS-F22S1G4

4 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 5

今までの合計 181