メインコンテンツにスキップ

HP Envy x360 15m-bp112dx Fan Replacement

必要な工具と部品

  1. HP Envy x360 15m-bp112dx Fan Replacement, Hard Drive: 手順 1、 1の画像 1
    • Power off the laptop before starting the disassembly.

    • Start by facing the device upside down with the hinge facing away from you.

    • Remove the seven 1 mm Phillips screws.

  2. HP Envy x360 15m-bp112dx Fan Replacement: 手順 2、 3の画像 1 HP Envy x360 15m-bp112dx Fan Replacement: 手順 2、 3の画像 2 HP Envy x360 15m-bp112dx Fan Replacement: 手順 2、 3の画像 3
    • Use an opening tool to pry the back panel by pushing the bottom cover upwards.

    • Place the bottom cover away from the laptop.

  3. HP Envy x360 15m-bp112dx Fan Replacement: 手順 3、 3の画像 1 HP Envy x360 15m-bp112dx Fan Replacement: 手順 3、 3の画像 2 HP Envy x360 15m-bp112dx Fan Replacement: 手順 3、 3の画像 3
    • Carefully remove the sata ribbon cable from the hard drive, pulling it out horizontally.

    • To avoid injury, ensure that you disconnect the battery prior to removing any of the cables in the laptop.

  4. HP Envy x360 15m-bp112dx Fan Replacement: 手順 4、 3の画像 1 HP Envy x360 15m-bp112dx Fan Replacement: 手順 4、 3の画像 2 HP Envy x360 15m-bp112dx Fan Replacement: 手順 4、 3の画像 3
    • Remove the hard drive by pulling it out vertically.

    • Remove the plastic casing around the hard drive by peeling it back.

  5. HP Envy x360 15m-bp112dx Fan Replacement: 手順 5、 2の画像 1 HP Envy x360 15m-bp112dx Fan Replacement: 手順 5、 2の画像 2
    • Disconnect the ribbon cable by pulling it away horizontally from the hard drive.

  6. HP Envy x360 15m-bp112dx Fan Replacement, Fan: 手順 6、 2の画像 1 HP Envy x360 15m-bp112dx Fan Replacement, Fan: 手順 6、 2の画像 2
    • Carefully peel back the tape connecting the heat sink to the fan assembly.

    • Loosen the four 1 mm Phillips screws retaining the fan assembly.

    • Remove the three 2 mm Phillips screws.

  7. HP Envy x360 15m-bp112dx Fan Replacement: 手順 7、 3の画像 1 HP Envy x360 15m-bp112dx Fan Replacement: 手順 7、 3の画像 2 HP Envy x360 15m-bp112dx Fan Replacement: 手順 7、 3の画像 3
    • Unplug the thin cable connected to the fan, pulling horizontally.

    • Carefully peel back the connected tape.

  8. HP Envy x360 15m-bp112dx Fan Replacement: 手順 8、 2の画像 1 HP Envy x360 15m-bp112dx Fan Replacement: 手順 8、 2の画像 2
    • Carefully remove the fan assembly by pulling on it upwards.

    • When reassembling, ensure that you clean off and replace the thermal paste on the fan assembly.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

2人の作成者と共同で作成されました。

Cameron Anderson

メンバー登録日: 03/20/23

289 ポイント

2のガイドは作成済み

チーム

UMass Dartmouth, Team 6-2, Botvin Spring 2023 UMass Dartmouth, Team 6-2, Botvin Spring 2023人のメンバー

UMASSD-BOTVIN-S23S6G2

4 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 7

今までの合計 117