HP Envy X2-15-C001Dx Hard Drive Replacement

はじめに

This guide will explain how to remove and replace the hard drive in the HP Envy X2-15-C001Dx.

The hard drive is the part of the computer that stores and retrieves data. Replacing the hard drive can solve different problems such as irregular noises and computer crashes.

Be sure to back up your hard drive before replacing.

必要な工具と部品

手順1 Back Panel

HP Envy X2-15-C001Dx Hard Drive Replacement, Back Panel: 手順 1、 1の画像 1

Place the laptop face down on a table.

編集

手順2

Lift up the back stand.

編集

手順3

Remove the five screws from the bottom of the back plate using a Phillips #1 screwdriver.

編集

手順4

Remove four screws from the back stand hinges using a Phillips #1 screwdriver.

編集

手順5

Remove the hinges and the back stand from the laptop.

編集

手順6

Use a spudger to remove the thin panel where the back stand was.

編集

手順7

Remove the screws from the back panel using a Phillips #1 screwdriver.

編集

手順8

Remove two side screws using a Phillips #1 screwdriver.

編集

手順9

Pry apart the base from the screen by going around the entire perimeter with an opening tool.

編集

手順10

Remove the back panel from the laptop.

編集

手順11 Hard Drive

HP Envy X2-15-C001Dx Hard Drive Replacement, Hard Drive: 手順 11、 3の画像 1

HP Envy X2-15-C001Dx Hard Drive Replacement, Hard Drive: 手順 11、 3の画像 2

HP Envy X2-15-C001Dx Hard Drive Replacement, Hard Drive: 手順 11、 3の画像 3

Lift the hard drive out from its slot, taking care not to tear the ribbon cable that is connecting it to the motherboard.
Unplug the hard drive from the motherboard.
Completely remove the hard drive from the laptop.