メインコンテンツにスキップ

HP Envy X2-15-C001Dx Audio Board Replacement

必要な工具と部品

  1. HP Envy X2-15-C001Dx Audio Board Replacement, Back Panel: 手順 1、 1の画像 1
    • Place the laptop face down on a table.

  2. HP Envy X2-15-C001Dx Audio Board Replacement: 手順 2、 2の画像 1 HP Envy X2-15-C001Dx Audio Board Replacement: 手順 2、 2の画像 2
    • Lift up the back stand.

  3. HP Envy X2-15-C001Dx Audio Board Replacement: 手順 3、 2の画像 1 HP Envy X2-15-C001Dx Audio Board Replacement: 手順 3、 2の画像 2
    • Remove the five screws from the bottom of the back plate using a Phillips #1 screwdriver.

  4. HP Envy X2-15-C001Dx Audio Board Replacement: 手順 4、 1の画像 1
    • Remove four screws from the back stand hinges using a Phillips #1 screwdriver.

  5. HP Envy X2-15-C001Dx Audio Board Replacement: 手順 5、 2の画像 1 HP Envy X2-15-C001Dx Audio Board Replacement: 手順 5、 2の画像 2
    • Remove the hinges and the back stand from the laptop.

  6. HP Envy X2-15-C001Dx Audio Board Replacement: 手順 6、 1の画像 1
    • Use a spudger to remove the thin panel where the back stand was.

  7. HP Envy X2-15-C001Dx Audio Board Replacement: 手順 7、 1の画像 1
    • Remove the screws from the back panel using a Phillips #1 screwdriver.

  8. HP Envy X2-15-C001Dx Audio Board Replacement: 手順 8、 2の画像 1 HP Envy X2-15-C001Dx Audio Board Replacement: 手順 8、 2の画像 2
    • Remove two side screws using a Phillips #1 screwdriver.

  9. HP Envy X2-15-C001Dx Audio Board Replacement: 手順 9、 2の画像 1 HP Envy X2-15-C001Dx Audio Board Replacement: 手順 9、 2の画像 2
    • Pry apart the base from the screen by going around the entire perimeter with an opening tool.

  10. HP Envy X2-15-C001Dx Audio Board Replacement: 手順 10、 2の画像 1 HP Envy X2-15-C001Dx Audio Board Replacement: 手順 10、 2の画像 2
    • Remove the back panel from the laptop.

  11. HP Envy X2-15-C001Dx Audio Board Replacement, Audio Board: 手順 11、 2の画像 1 HP Envy X2-15-C001Dx Audio Board Replacement, Audio Board: 手順 11、 2の画像 2
    • Remove the three 6 mm screws from the audio board using a Phillips #1 screwdriver.

  12. HP Envy X2-15-C001Dx Audio Board Replacement: 手順 12、 2の画像 1 HP Envy X2-15-C001Dx Audio Board Replacement: 手順 12、 2の画像 2
    • Flip up the black retaining flap securing the audio board's ribbon cable.

    • Slide the ribbon cable out of its connector on the audio board.

  13. HP Envy X2-15-C001Dx Audio Board Replacement: 手順 13、 1の画像 1
    • Remove the audio board from the laptop.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

1人の作成者と共同作成されました。

Dylan Hathaway

メンバー登録日: 10/25/21

686 ポイント

5のガイドは作成済み

チーム

UMass Dartmouth, Team 2-6, Sinclaire Fall 2021 UMass Dartmouth, Team 2-6, Sinclaire Fall 2021人のメンバー

UMASSD-SINCLAIRE-F21S2G6

3 メンバー

6のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 8

今までの合計 68