メインコンテンツにスキップ

HP Elite x2 1012 G2 Screen Replacement

必要な工具と部品

  1. HP Elite x2 1012 G2 Screen Replacement, Screen: 手順 1、 1の画像 1
    • Make sure the device is turned off before starting.

    • Orient the device so the back is facing you, with the kickstand up.

  2. HP Elite x2 1012 G2 Screen Replacement: 手順 2、 3の画像 1 HP Elite x2 1012 G2 Screen Replacement: 手順 2、 3の画像 2 HP Elite x2 1012 G2 Screen Replacement: 手順 2、 3の画像 3
    • Remove the six 3mm Torx T5 screws underneath the kickstand.

  3. HP Elite x2 1012 G2 Screen Replacement: 手順 3、 2の画像 1 HP Elite x2 1012 G2 Screen Replacement: 手順 3、 2の画像 2
    • Turn the device over so the screen is facing you.

    • Place a suction cup firmly onto a corner of the screen.

    • Lift up gently until you see the screen separate from the casing.

    • Repeat this process for all four corners.

  4. HP Elite x2 1012 G2 Screen Replacement: 手順 4、 1の画像 1
    • Lift the screen up and off of the device.

    • Pry each corner up first, otherwise you may damage or crack the screen.

  5. HP Elite x2 1012 G2 Screen Replacement: 手順 5、 3の画像 1 HP Elite x2 1012 G2 Screen Replacement: 手順 5、 3の画像 2 HP Elite x2 1012 G2 Screen Replacement: 手順 5、 3の画像 3
    • Remove the two connectors on the back of the screen by lifting the connector tabs on the motherboard with a plastic opening tool and pulling gently.

  6. HP Elite x2 1012 G2 Screen Replacement: 手順 6、 2の画像 1 HP Elite x2 1012 G2 Screen Replacement: 手順 6、 2の画像 2
    • Remove the screen by gently lifting it off of the device.

終わりに

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

作成者

3人の作成者と共同で作成されました。

Noah Stapp

メンバー登録日: 04/18/18

722 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team S18-G5, Livingston Spring 2018 Cal Poly, Team S18-G5, Livingston Spring 2018人のメンバー

CPSU-LIVINGSTON-S18S18G5

4 メンバー

13のガイドは作成済み

5 件のコメント

Where can I purchase a screen for the HP Elite x2 1012 g2?

Greg M - 返信

just completed this, VERY surprising to find a HP product with an easy install

CILLIAN BYRNE - 返信

Just finished a repair and very easy to do. Thank you!!

Richard Taylor - 返信

The touch stopped working after the replacement. Any suggestions?

el._.msn - 返信

I replaced my screen and upon turning the device on I have a black screen. Already made sure connections are all attached correctly. Tried hard reset with power and volume button down for 15 seconds. A bad new screen? Any other ideas?

iamacomputertech - 返信

コメントを追加

統計データ:

過去 24時間: 3

過去 7 日: 28

過去 30 日: 123

今までの合計 8,381