メインコンテンツにスキップ

HP Elite x2 1012 G2 Battery Replacement

必要な工具と部品

  1. HP Elite x2 1012 G2 Battery Replacement, Screen: 手順 1、 1の画像 1
    • Make sure the device is turned off before starting.

    • Orient the device so the back is facing you, with the kickstand up.

  2. HP Elite x2 1012 G2 Battery Replacement: 手順 2、 3の画像 1 HP Elite x2 1012 G2 Battery Replacement: 手順 2、 3の画像 2 HP Elite x2 1012 G2 Battery Replacement: 手順 2、 3の画像 3
    • Remove the six 3mm Torx T5 screws underneath the kickstand.

  3. HP Elite x2 1012 G2 Battery Replacement: 手順 3、 2の画像 1 HP Elite x2 1012 G2 Battery Replacement: 手順 3、 2の画像 2
    • Turn the device over so the screen is facing you.

    • Place a suction cup firmly onto a corner of the screen.

    • Lift up gently until you see the screen separate from the casing.

    • Repeat this process for all four corners.

  4. HP Elite x2 1012 G2 Battery Replacement: 手順 4、 1の画像 1
    • Lift the screen up and off of the device.

    • Pry each corner up first, otherwise you may damage or crack the screen.

  5. HP Elite x2 1012 G2 Battery Replacement: 手順 5、 3の画像 1 HP Elite x2 1012 G2 Battery Replacement: 手順 5、 3の画像 2 HP Elite x2 1012 G2 Battery Replacement: 手順 5、 3の画像 3
    • Remove the two connectors on the back of the screen by lifting the connector tabs on the motherboard with a plastic opening tool and pulling gently.

  6. HP Elite x2 1012 G2 Battery Replacement: 手順 6、 2の画像 1 HP Elite x2 1012 G2 Battery Replacement: 手順 6、 2の画像 2
    • Remove the screen by gently lifting it off of the device.

  7. HP Elite x2 1012 G2 Battery Replacement, Battery: 手順 7、 1の画像 1
    • Orient the device so that the battery is closest to you.

    • The battery is the large, black rectangle at the bottom of the device.

  8. HP Elite x2 1012 G2 Battery Replacement: 手順 8、 2の画像 1 HP Elite x2 1012 G2 Battery Replacement: 手順 8、 2の画像 2
    • Remove all six Phillips 3 mm screws around the battery by rotating in the counterclockwise direction with a Phillips screwdriver.

  9. HP Elite x2 1012 G2 Battery Replacement: 手順 9、 2の画像 1 HP Elite x2 1012 G2 Battery Replacement: 手順 9、 2の画像 2
    • Remove the battery's connector by pushing both sides of the tab towards yourself with a plastic opening tool.

  10. HP Elite x2 1012 G2 Battery Replacement: 手順 10、 1の画像 1
    • Lift the battery out of the device.

終わりに

To reassemble your device, follow these instructions in reverse order.

13 の人々がこのガイドを完成させました。

作成者

5人の作成者と共同で作成されました。

Andy Velazquez

メンバー登録日: 04/18/18

314 ポイント

1ガイドが承認済み

チーム

Cal Poly, Team S18-G5, Livingston Spring 2018 Cal Poly, Team S18-G5, Livingston Spring 2018人のメンバー

CPSU-LIVINGSTON-S18S18G5

4 メンバー

13のガイドは作成済み

4 件のコメント

how do you test the battery? what voltage should it be maintaining?

scott kay - 返信

Hi, after the replacement battery
toch not working, help pls?

Parsa Aghabeikzadeh - 返信

PC not coming on, also not charging.

Abiola - 返信

コメントを追加

統計データ:

過去 24時間: 21

過去 7 日: 92

過去 30 日: 429

今までの合計 22,214