はじめに
Malfunctioning buttons can hinder the usefulness of your printer and make performing certain routine tasks impossible. Replace them to prevent any future unnecessary hassle.
必要な工具と部品
-
-
Press your thumb down on the center of the button plate located on the left side of the printer.
-
Hook your fingers underneath the front edge of the button plate and pull upwards making sure to keep pressure on the middle of the plate with your thumb.
-
-
-
Turn the plate over to reveal the white strip of connecting tape that connects the plate to the printer.
-
Find where the tape is connected to the green button circuit board (Location circled in red)
-
Place two fingers on the tape right where it connects to the plate and gently pull the tape out of the circuit board.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
ある他の人がこのガイドを完成しました。