メインコンテンツにスキップ

はじめに

This guide will help you replace your power module in a HP Color Laser Jet Pro MFP M277dw.

  1. Open and lower the back panel by pulling it down. Remove one Phillips #2 10 mm screw. Remove one Phillips #2 10 mm screw.
    • Open and lower the back panel by pulling it down.

    • Remove one Phillips #2 10 mm screw.

  2. Use the plastic opening tool to remove the right side panel of the printer. Flipping the printer on its side, with the right side facing up, will make it easier to remove. Flipping the printer on its side, with the right side facing up, will make it easier to remove.
    • Use the plastic opening tool to remove the right side panel of the printer.

    • Flipping the printer on its side, with the right side facing up, will make it easier to remove.

  3. PCラップトップ用バッテリー

    An easy fix for a big power boost.

    ショップを見る

    PCラップトップ用バッテリー

    An easy fix for a big power boost.

    ショップを見る
  4. Remove two Phillips #2 12mm screws. Remove four different pin connectors that attach to the power module located at the bottom. Removing the white connector is  made easier with assistance of a spudger/flat tip that loosens the clamp.
    • Remove two Phillips #2 12mm screws.

    • Remove four different pin connectors that attach to the power module located at the bottom.

    • Removing the white connector is made easier with assistance of a spudger/flat tip that loosens the clamp.

  5. Remove two Phillips #2 10mm from the left (front) and right (back) side that attach the power module to the printer. Remove two Phillips #2 10mm from the left (front) and right (back) side that attach the power module to the printer.
    • Remove two Phillips #2 10mm from the left (front) and right (back) side that attach the power module to the printer.

  6. Slowly lift the power module from the printer using both hands. Slowly lift the power module from the printer using both hands. Slowly lift the power module from the printer using both hands.
    • Slowly lift the power module from the printer using both hands.

まとめ

To reassemble your device, follow these instructions in reverse order.

Lyndon Fresnido

メンバー登録日: 2018年10月08日

121 ポイント

1ガイドが承認済み

チーム

Cal Poly, Team S4-G2, White Fall 2018 Cal Poly, Team S4-G2, White Fall 2018人のメンバー

CPSU-WHITE-F18S4G2

3 メンバー

5のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 1

過去 7 日: 7

過去 30 日: 42

今までの合計 384