HP 8 1401 Rear-Facing Camera Replacement

はじめに

This guide will help you if your rear-facing camera is cracked or damaged. You may need to pull a little bit to remove the camera, it is well secured in the tablet.

必要な工具と部品

手順1 Back Panel

HP 8 1401 Rear-Facing Camera Replacement, Back Panel: 手順 1、 1の画像 1

Using a Torx T4 screwdriver, remove the four 5 mm screws on the back panel.

編集

手順2

Insert the tip of a plastic opening tool in the seam between the front and back panels.

編集

手順3

Slide the plastic opening tool around all edges of the device until the back panel detaches.
Lift off the back panel.

編集

手順4 Rear-Facing Camera

HP 8 1401 Rear-Facing Camera Replacement, Rear-Facing Camera: 手順 4、 2の画像 1

HP 8 1401 Rear-Facing Camera Replacement, Rear-Facing Camera: 手順 4、 2の画像 2

この手順で使用する道具：

Tweezers

$4.99

購入する

Place the tip of your spudger under the edge of the press fit connector, and pry the connector straight up from its socket.
Lift the rear-facing camera out of its compartment using the tweezers.