HP 8 1401 Back Panel Replacement

はじめに

This guide is useful if you need to replace any of the parts inside the device. When moving the opening tool around the device, it might be necessary to pull a little to detach the two sides.

必要な工具と部品

手順1 Back Panel

HP 8 1401 Back Panel Replacement, Back Panel: 手順 1、 1の画像 1

Using a Torx T4 screwdriver, remove the four 5 mm screws on the back panel.

編集

手順2

Insert the tip of a plastic opening tool in the seam between the front and back panels.

編集

手順3

Slide the plastic opening tool around all edges of the device until the back panel detaches.
Lift off the back panel.

編集

終わりに

To reassemble your device, follow these instructions in reverse order. Align the front and back panels and press them together, then screw in the four screws.