HP 7 Plus 1302 Speaker Replacement - iFixit 修理ガイド

はじめに

This guide will help you to replace your broken speaker step by step. Be very careful when you remove your speaker, since using excessive force may cause damage.

必要な工具と部品

手順1 Back Cover

HP 7 Plus 1302 Speaker Replacement, Back Cover: 手順 1、 1の画像 1

Using the T5 Torx Screwdriver, remove the T5x3mm screws located in all 4 corners.
Device should be turned off and unplugged before starting the replacements.

手順2

HP 7 Plus 1302 Speaker Replacement: 手順 2、 2の画像 1

HP 7 Plus 1302 Speaker Replacement: 手順 2、 2の画像 2

Use the plastic opening tool to push in between the front and the back of the tablet.
Slide the plastic opening tool around all 4 sides of the tablet to separate the back cover.
Be careful when you are trying to remove the back as it can damage the screen if you force it too much.

手順3

HP 7 Plus 1302 Speaker Replacement: 手順 3、 2の画像 1

HP 7 Plus 1302 Speaker Replacement: 手順 3、 2の画像 2

Continue sliding the plastic opening tool around the tablet until all 4 sides are separated from each other.
Remove the back cover.

手順4 Speaker

HP 7 Plus 1302 Speaker Replacement, Speaker: 手順 4、 1の画像 1

Use tweezers to push out the speaker connector.

手順5

HP 7 Plus 1302 Speaker Replacement: 手順 5、 1の画像 1

A thin strip of double sided tape secure sthe speaker to the device and is located beneath the speaker.
Use the flat end of spudger to pry out the speaker
Be careful when working the speaker away from the double-sided tape. Excessive force may damage the component.

手順6

HP 7 Plus 1302 Speaker Replacement: 手順 6、 1の画像 1

Lift the speaker away from the device and replace it with the new one.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

junlin16

メンバー登録日: 07/07/15

101 ポイント

1ガイドが承認済み

チーム

IUPUI, Team 1-2, Renguette SU 2015 IUPUI, Team 1-2, Renguette SU 2015人のメンバー

IUPUI-RENGUETTE-SU15S1G2

5 メンバー

8のガイドは作成済み

0 件のコメント

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 1

今までの合計 199