HP 7 PLUS 1301 Battery Replacement - iFixit 修理ガイド

はじめに

The battery might need to be changed if the device does not power up, or does not charge anymore. The most challenging step to changing the battery is removing the back cover. The tools listed (or similar) are necessary for the battery replacement.

必要な工具と部品

手順1 Battery

HP 7 PLUS 1301 Battery Replacement, Battery: 手順 1、 2の画像 1

HP 7 PLUS 1301 Battery Replacement, Battery: 手順 1、 2の画像 2

Make sure the device is off and not plugged in before starting.
Using the Torx T5 screwdriver, remove the 3mm screws on all 4 corners of the device.

手順2

HP 7 PLUS 1301 Battery Replacement: 手順 2、 2の画像 1

HP 7 PLUS 1301 Battery Replacement: 手順 2、 2の画像 2

Using the plastic opening tool, push in between the front, then slide it around.
Slide the plastic opening tool all the way around the tablet to separate the back cover.
Be careful when trying to remove the back as the screen can be damaged with excessive force.

手順3

HP 7 PLUS 1301 Battery Replacement: 手順 3、 2の画像 1

HP 7 PLUS 1301 Battery Replacement: 手順 3、 2の画像 2

Continue sliding the plastic opening tool around the tablet until the cover fully separates from the device.
Remove the back cover.

手順4

HP 7 PLUS 1301 Battery Replacement: 手順 4、 2の画像 1

HP 7 PLUS 1301 Battery Replacement: 手順 4、 2の画像 2

Push out the connector to disconnect the battery.
Move the battery connector clear of the connector socket.

手順5

HP 7 PLUS 1301 Battery Replacement: 手順 5、 1の画像 1

Carefully remove the battery by sliding a plastic spudger under the battery. Use an adhesive remover if available under the battery to make it easier for the battery to come off.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

2人の作成者と共同で作成されました。

Adanna Ilori

メンバー登録日: 02/05/19

301 ポイント

2のガイドは作成済み

+4 個以上のバッジ

チーム

UC Davis, Team S20-G6, Lore Winter 2019 UC Davis, Team S20-G6, Lore Winter 2019人のメンバー

UCD-LORE-W19S20G6

3 メンバー

4のガイドは作成済み

0 件のコメント

統計データ:

過去 24時間: 0

過去 7 日: 11

過去 30 日: 16

今までの合計 739