メインコンテンツにスキップ

HP 310-1037 Hard Drive Replacement

必要な工具と部品

  1. HP 310-1037 Hard Drive Replacement, Hard Drive: 手順 1、 3の画像 1 HP 310-1037 Hard Drive Replacement, Hard Drive: 手順 1、 3の画像 2 HP 310-1037 Hard Drive Replacement, Hard Drive: 手順 1、 3の画像 3
    • HP310-1037 Touchsmart PC with a dead hard drive. The hard drive is located behind the stand cover.

    • Lay the PC flat on the front to gain access to the stand cover

    • Remove the single screw that holds the stand cover to the chassis with a flat tip screwdriver

  2. HP 310-1037 Hard Drive Replacement: 手順 2、 3の画像 1 HP 310-1037 Hard Drive Replacement: 手順 2、 3の画像 2 HP 310-1037 Hard Drive Replacement: 手順 2、 3の画像 3
    • Remove the stand cover

    • The hard drive caddy is held in place with 1 Phillips screw

    • Use a #0 Phillips screwdriver to remove that screw

  3. HP 310-1037 Hard Drive Replacement: 手順 3、 3の画像 1 HP 310-1037 Hard Drive Replacement: 手順 3、 3の画像 2 HP 310-1037 Hard Drive Replacement: 手順 3、 3の画像 3
    • Lift the handle on the hard drive caddy

    • and pull it to the backside. This will remove the hard drive caddy from the computer.

    • To remove the hard drive from the caddy, turn it over. There are four Phillips scres that hold the hard drive in place.

  4. HP 310-1037 Hard Drive Replacement: 手順 4、 2の画像 1 HP 310-1037 Hard Drive Replacement: 手順 4、 2の画像 2
    • Once the four screws are removed, slide the hard drive out of the caddy.

    • Here is the failed drive. It is a Hitachi HDS721010CLA332. Failure with this drive is all to common.

終わりに

To reassemble your device, follow these instructions in reverse order.

6 の人々がこのガイドを完成させました。

作成者

1人の作成者と共同作成されました。

oldturkey03

メンバー登録日: 09/29/10

784,298 ポイント

119のガイドは作成済み

チーム

Global Fixers Global Fixers人のメンバー

Community

33 メンバー

558のガイドは作成済み

コメント 1 件

This one made me laugh - Remove two screws. Pull the drive out. Difficulty: Moderate.

LOL

Justin Coope - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 10

過去 30 日: 40

今までの合計 4,768