はじめに

Use this guide to replace the fan in your laptop.

  1. To remove the battery, simply push the tabs towards each other.
    • To remove the battery, simply push the tabs towards each other.

    • The battery will come out with force, be sure to keep anything fragile away from the laptop during this process.

  2. Remove the four screws (13.7mm) with a Phillips #0 screwdriver.
    • Remove the four screws (13.7mm) with a Phillips #0 screwdriver.

    • Be sure to lift all four rubber tabs to access screws (7.51mm) underneath.

    • Rubber tabs will require force to access screws.

    • Use the Philips 0 screwdriver to unscrew the screws (7.51mm) that were underneath the battery.

    • Pull outwards on the disk reader to remove from main frame.

    • This removal will require force.

    • All screws must be removed before removing disk reader.

    • Lift back panel to access internal components.

    • You will need to use force to pry it open.

    • Unscrew all four screws connecting the heatsink to the motherboard.

    • The screws holding the heat sink will not detach from the heat sink.

    • All four screws must be loosened before removing the heat sink.

    • After loosening all screws remove the heat sink and store it in a safe place.

    • After removing the heat sink, disconnect the cable connecting the fan to the motherboard.

    • Remove the old fan from the device.

まとめ

To reassemble your device, follow these instructions in reverse order.

Juan Seoane-Seri

メンバー登録日: 2018年09月24日

171 ポイント

2のガイドは作成済み

チーム

University of North Texas, Team S7-G2, Thompson Fall 2018 University of North Texas, Team S7-G2, Thompson Fall 2018人のメンバー

UNT-THOMPSON-F18S7G2

6 メンバー

7のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 22

今までの合計 39