修理を始めるには コミュニティ ストア

HP 15-ba0709dx Back Cover Replacement

はじめに

Follow this guide to remove the back cover on HP 15-ba0709dx laptop. This guide is a prerequisite to practically every repair and replacement that this laptop requires.

必要な工具と部品

  1. HP 15-ba0709dx Back Cover Replacement, Battery: 手順 1、 1の画像 1

    • Flip the device over and locate the battery compartment.

    • Slide the battery release latch on the left and right side until the battery is detached from its slot.

    • A noticeable pop will be heard when the battery is fully released.

    編集

  2. HP 15-ba0709dx Back Cover Replacement: 手順 2、 1の画像 1

    • Pull the battery out of its slot.

    • Be careful not to damage any of the connectors in the process.

    編集

  3. HP 15-ba0709dx Back Cover Replacement, Back Cover: 手順 3、 1の画像 1

    • Place the laptop on a clean, flat surface with the bottom side facing up.

    編集

  5. HP 15-ba0709dx Back Cover Replacement: 手順 4、 1の画像 1

    • Using a Phillips Head Screwdriver, remove the screws anchoring the bottom casing.

    • Note: Make sure to keep track of the screws once they have been removed.

    編集

  6. HP 15-ba0709dx Back Cover Replacement: 手順 5、 1の画像 1

    • Locate the screws about 1 inch from the battery release tabs and use a Phillips Head Screwdriver to remove these screws.

    • Note:Place these newly removed screws with the ones removed in Step 2.

    編集

  7. HP 15-ba0709dx Back Cover Replacement: 手順 6、 2の画像 1 HP 15-ba0709dx Back Cover Replacement: 手順 6、 2の画像 2

    • Locate the rubber friction pads on the top corners of the laptop. Pry the pads from the laptop and place them off to the side

    • Removing the friction pads will reveal two more anchoring screws.

    • Note: The adhesive keeping the pads on the laptop will weaken once doing this, but it is necessary to removing the bottom cover of the laptop.

    編集

  8. HP 15-ba0709dx Back Cover Replacement: 手順 7、 1の画像 1

    • Remove disc reader.

    • Note: If all screws are removed it should slide out easily.

    編集

  9. HP 15-ba0709dx Back Cover Replacement: 手順 8、 2の画像 1 HP 15-ba0709dx Back Cover Replacement: 手順 8、 2の画像 2

    • Use a plastic prod to pry the back cover off the laptop.

    • Be careful not to damage the laptop while prying.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

6人の作成者と共同で作成されました。

Lydia Brown

メンバー登録日: 03/20/17

369 ポイント

2のガイドは作成済み

バッジ: 11

+8 個以上のバッジ

チーム

Texas Tech, Team S13-G3, Bennett Spring 2017 Texas Tech, Team S13-G3, Bennett Spring 2017人のメンバー

TTU-BENNETT-S17S13G3

5 メンバー

5のガイドは作成済み

2 件のコメント

Make sure to use a very thin shim, but strong enough to pry.

spotty118 - 返信

thanks- also worked for 15-ba053nr

Renee Brandt - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 8

今までの合計 1,882