メインコンテンツにスキップ

HP 15-ay103dx Motherboard Replacement

必要な工具と部品

  1. HP 15-ay103dx Motherboard  Replacement, Battery: 手順 1、 1の画像 1
    • Slide the two battery lock latches on the back of the device to the “unlock” position.

  2. HP 15-ay103dx Motherboard  Replacement: 手順 2、 1の画像 1
    • Lift the battery upward to remove it from the device.

  3. HP 15-ay103dx Motherboard  Replacement, Back Panel: 手順 3、 1の画像 1
    • Using the PH1 phillips-head screwdriver, remove all the 5/16 in. screws from the back of the device.

    • There should be 10 in total, be sure to keep them together!

  4. HP 15-ay103dx Motherboard  Replacement: 手順 4、 1の画像 1
    • Locate the optical disc drive and remove it from the device by sliding it straight of the device.

  5. HP 15-ay103dx Motherboard  Replacement: 手順 5、 2の画像 1 HP 15-ay103dx Motherboard  Replacement: 手順 5、 2の画像 2
    • Covering the hinges of the device are rubber bumpers secured to the device using adhesive. Remove them carefully.

    • Place the adhesive side up as you will need to place them back after your replacement is complete.

  6. HP 15-ay103dx Motherboard  Replacement: 手順 6、 2の画像 1 HP 15-ay103dx Motherboard  Replacement: 手順 6、 2の画像 2
    • In the same spot you’ve just removed the bumpers from, you will find two 5/16 in. screws. Using the same Phillips-head screwdriver used in step 2, remove the screws

    • Be sure to keep the screws together!

  7. HP 15-ay103dx Motherboard  Replacement: 手順 7、 1の画像 1
    • Carefully remove the back panel from the device.

    • If you are unable to do this with your hands, you can use a thin prying tool of your choice to make it easier!

  8. HP 15-ay103dx Motherboard  Replacement, Motherboard: 手順 8、 3の画像 1 HP 15-ay103dx Motherboard  Replacement, Motherboard: 手順 8、 3の画像 2 HP 15-ay103dx Motherboard  Replacement, Motherboard: 手順 8、 3の画像 3
    • Disconnect the wires around the motherboard securing it to the device.

    • To do this, flip the black "switches" securing the wires into place upwards.

  9. HP 15-ay103dx Motherboard  Replacement: 手順 9、 1の画像 1
    • Remove the six 5/16 in. screws holding the motherboard onto the device using the P1 philips-head screwdriver.

    • Be sure to keep them together!

  10. HP 15-ay103dx Motherboard  Replacement: 手順 10、 3の画像 1 HP 15-ay103dx Motherboard  Replacement: 手順 10、 3の画像 2 HP 15-ay103dx Motherboard  Replacement: 手順 10、 3の画像 3
    • Disconnect the wire securing the whole motherboard located at the top to the motherboard.

    • This is possible with your fingers, but is easier to do using an iFixit opening tool.

  11. HP 15-ay103dx Motherboard  Replacement: 手順 11、 1の画像 1
    • Carefully lift the motherboard to remove it from the device.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

3人の作成者と共同で作成されました。

Rafael Cardona Bautista

メンバー登録日: 09/25/17

104 ポイント

1ガイドが承認済み

チーム

University of North Texas, Team S3-G3, Thompson Fall 2017 University of North Texas, Team S3-G3, Thompson Fall 2017人のメンバー

UNT-THOMPSON-F17S3G3

4 メンバー

6のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 5

過去 30 日: 11

今までの合計 1,555