HP 14-dq0055dx Speaker Replacement

はじめに

The speakers are an important aspect of a computer. They provide a lot to the user experience, such as Music, Videos, and Games. With faulty speakers, you may notice dampened sound, distortion, or no sound at all.

We will provide an easy and efficient way to replace your speakers. Before starting the guide be sure the laptop is powered off and the AC adapter is unplugged.

For this guide, we will be using the iFixit Precision Bit Driver, 15 Philips Screwdriver Bit(1.4 mm), and an Anti-Static Wrist Strap.

必要な工具と部品

手順1 Speaker

HP 14-dq0055dx Speaker Replacement, Speaker: 手順 1、 3の画像 1

HP 14-dq0055dx Speaker Replacement, Speaker: 手順 1、 3の画像 2

HP 14-dq0055dx Speaker Replacement, Speaker: 手順 1、 3の画像 3

Turn laptop upside down exposing the screws.
Gently remove the rubber grips to reveal the remaining screws.
Using a Phillips head #1 screwdriver, remove all eight 2.5 mm screws.

編集

手順2

Turn the laptop back over and open the screen.
Insert an opening tool into the seam between the keyboard and the bottom panel.
Run the opening tool along the seam to separate the back panel from the keyboard.
You may hear clicking as clips release the bottom panel from the keyboard.

編集

手順3

After the bottom panel has been separated from the laptop, close the laptop.
Flip the laptop back over.
Carefully place hands on either side of the laptop's back panel.
Lift up to remove the panel.

編集

手順4

Remove the five 2.5 mm screws holding the heat sink plate.

編集

手順5

HP 14-dq0055dx Speaker Replacement: 手順 5、 3の画像 3

Remove the ZIF cable by pulling the black clasp up.

編集

手順6

HP 14-dq0055dx Speaker Replacement: 手順 6、 3の画像 3

Lift the black adhesive square card covering two small cables connected to the WIFI card.
Unplug the small wires one and two with your fingers.
Unravel the cable from the right speaker.