メインコンテンツにスキップ

はじめに

Sometimes a devices battery has been recharged too many times. This recharging causes the battery to diminish over time and hold less of a charge. The purpose of this guide is to demonstrate how to replace a bad or warn battery on the HMDX Jam Plus.

パーツ

パーツは指定されていません。

  1. Flip the device over so the bottom is facing up. Use the large plastic opening tool to gently pry the rubber base from the device. Slowly move the plastic opening tool around the edge of the rubber base to separate it from the plastic.
    • Flip the device over so the bottom is facing up.

    • Use the large plastic opening tool to gently pry the rubber base from the device.

    • Slowly move the plastic opening tool around the edge of the rubber base to separate it from the plastic.

  2. Use a Phillips #1 screwdriver to remove the four black 9mm screws from the device. Use a Phillips #1 screwdriver to remove the four black 9mm screws from the device.
    • Use a Phillips #1 screwdriver to remove the four black 9mm screws from the device.

  3. Gently separate the base from the rest of the device to reveal the battery and the main board. Gently separate the base from the rest of the device to reveal the battery and the main board.
    • Gently separate the base from the rest of the device to reveal the battery and the main board.

  4. Carefully use the plastic opening tool to remove the glue around the battery and speaker connectors. Pull gently on the connectors to separate each one from the main board. The battery is connected to board in the red socket and the speaker is connected in the white socket.
    • Carefully use the plastic opening tool to remove the glue around the battery and speaker connectors.

    • Pull gently on the connectors to separate each one from the main board.

    • The battery is connected to board in the red socket and the speaker is connected in the white socket.

  5. Batteries can be very dangerous if punctured. Use extra caution when using tools around the battery. Use the plastic opening tool to gently pry the battery free from the rest of the device. Use the plastic opening tool to gently pry the battery free from the rest of the device.
    • Batteries can be very dangerous if punctured. Use extra caution when using tools around the battery.

    • Use the plastic opening tool to gently pry the battery free from the rest of the device.

  6. Use new adhesive to secure battery back to the rest of the device. Use new adhesive to secure battery back to the rest of the device.
    • Use new adhesive to secure battery back to the rest of the device.

まとめ

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

Maxwell Erickson

メンバー登録日: 2015年10月22日

533 ポイント

4のガイドは作成済み

チーム

Montana Tech, Team 10-3, Shirk Fall 2015 Montana Tech, Team 10-3, Shirk Fall 2015人のメンバー

MTUM-SHIRK-F15S10G3

4 メンバー

4のガイドは作成済み

Where may battery be purchased?

Thanks,

zappenfusen

warnsdorff - 返信

Where can a battery be purchased?

robertwacker - 返信

コメントを追加する

統計データを表示:

過去 24時間: 4

過去 7 日: 13

過去 30 日: 91

今までの合計 4,009