HMDX Chill Front Buttons Replacement

はじめに

If the buttons on the HMDX Chill no longer function properly, you will need to disassemble and replace the buttons. This guide will walk you through removing the buttons from the HMDX Chill without breaking them. This guide also gives you information on how to replace new buttons easily.

必要な工具と部品

手順1 Remove Rubber Base

HMDX Chill Front Buttons Replacement, Remove Rubber Base: 手順 1、 3の画像 1

HMDX Chill Front Buttons Replacement, Remove Rubber Base: 手順 1、 3の画像 2

HMDX Chill Front Buttons Replacement, Remove Rubber Base: 手順 1、 3の画像 3

Insert a metal spudger under the rubber base.
Pry the rubber base off.

編集

手順2

Use a Phillips #1 screwdriver to remove four 9 mm screws from the base of the device.

編集

手順3

Grip the base of the HMDX Chill.
Pull the base upwards.

編集

手順4 Front Buttons

HMDX Chill Front Buttons Replacement, Front Buttons: 手順 4、 1の画像 1

Using a metal spudger, push the small latch upwards towards the button from the bottom of the base.
These are located underneath the rubber base, prior to removal.

編集

手順5

Insert a spudger into the slit between the bottom of the buttons and the speaker base.
Push the buttons upwards, away from the base, until they come loose.
Use your hand to pull the linked buttons off the base.