修理を始めるには コミュニティ ストア

Graco Secure Coverage Nursery Unit Power Jack Replacement

はじめに

Use this guide to replace the power jack on your Graco Secure Coverage Digital Baby Monitor for nursery unit.

The power jack replacement includes the power jack and battery replacement.

必要な工具と部品

  1. Graco Secure Coverage Nursery Unit Power Jack Replacement, Nursery Unit Battery: 手順 1、 3の画像 1 Graco Secure Coverage Nursery Unit Power Jack Replacement, Nursery Unit Battery: 手順 1、 3の画像 2 Graco Secure Coverage Nursery Unit Power Jack Replacement, Nursery Unit Battery: 手順 1、 3の画像 3

    • Remove the 9mm screw from the battery cover of the nursery unit using a Phillips #1 tip screwdriver.

    編集

  2. Graco Secure Coverage Nursery Unit Power Jack Replacement: 手順 2、 2の画像 1 Graco Secure Coverage Nursery Unit Power Jack Replacement: 手順 2、 2の画像 2

    • Using the plastic opening tool, pry and remove the battery cover carefully.

    • Remove the batteries using plastic opening tool.

    • Replace the batteries.

    編集

  3. Graco Secure Coverage Nursery Unit Power Jack Replacement, Nursery Unit Power Jack: 手順 3、 2の画像 1 Graco Secure Coverage Nursery Unit Power Jack Replacement, Nursery Unit Power Jack: 手順 3、 2の画像 2

    • Remove the two 9mm Phillips #1 screws from the rare case of the device.

    • Place the screws in a secure place.

    編集

  5. Graco Secure Coverage Nursery Unit Power Jack Replacement: 手順 4、 1の画像 1

    • Hold the bottom of the device with one hand and pull down to separate the front and rare cases.

    • While holding the device with one hand, use plastic opening tool to pry the edges of the front case away from the back case.

    • Take your time and apply constant force carefully to avoid breaking any other plastic parts from the device.

    編集

  6. Graco Secure Coverage Nursery Unit Power Jack Replacement: 手順 5、 2の画像 1 Graco Secure Coverage Nursery Unit Power Jack Replacement: 手順 5、 2の画像 2

    • Remove all three 7mm Phillips #1 screws from the mother board.

    • Make sure you gently unscrew the screws with moderate force and light pressure to avoid any damages.

    編集

  7. Graco Secure Coverage Nursery Unit Power Jack Replacement: 手順 6、 2の画像 1 Graco Secure Coverage Nursery Unit Power Jack Replacement: 手順 6、 2の画像 2

    • Pick up the mother board carefully.

    • Using plastic opening tool, gently pry the power jack plastic part and separate it away from the device case.

    • Apply constant force to avoid breaking the plastic part.

    編集

  8. Graco Secure Coverage Nursery Unit Power Jack Replacement: 手順 7、 1の画像 1

    • Solder off the wires from the mother board.

    • There are many pins attached to the mother board, make sure you solder off the proper pins that attached to the power jack wires.

    • Replace the power jack.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

2人の作成者と共同で作成されました。

Omar Abdullah

メンバー登録日: 09/06/15

201 ポイント

2のガイドは作成済み

バッジ: 6

+3 個以上のバッジ

チーム

USF Tampa, Team 6-5, Remmell Fall 2015 USF Tampa, Team 6-5, Remmell Fall 2015人のメンバー

USFT-REMMELL-F15S6G5

4 メンバー

8のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 3

過去 30 日: 4

今までの合計 135