メインコンテンツにスキップ

GoPro Karma Landing Gear Replacement

必要な工具と部品

  1. GoPro Karma Landing Gear Replacement, Battery: 手順 1、 1の画像 1
    • Hook your fingers on the tab and pull out the battery.

  2. GoPro Karma Landing Gear Replacement, Stabilizer: 手順 2、 3の画像 1 GoPro Karma Landing Gear Replacement, Stabilizer: 手順 2、 3の画像 2 GoPro Karma Landing Gear Replacement, Stabilizer: 手順 2、 3の画像 3
    • Locate stabilizer collar’s unlock and lock symbols. Twist the collar counterclockwise to unlock the stabilizer from GoPro Karma body.

    • Place the GoPro Karma on a stable surface with the legs folded in and the stabilizer facing towards yourself.

  3. GoPro Karma Landing Gear Replacement: 手順 3、 1の画像 1
    • Remove the stabilizer by pulling the entire stabilizer out of the drone body.

  4. GoPro Karma Landing Gear Replacement, Landing Gear: 手順 4、 1の画像 1
    • Flip the drone upside down with the landing gear out.

    • Remove the four 1.2 cm long hex screws with a Hex 2.0 screwdriver in the four corners of the landing gear

  5. GoPro Karma Landing Gear Replacement: 手順 5、 1の画像 1
    • Push with your thumb and pull up with your fingers to remove the landing gear.

    • Caution: The landing gear is connected by a thin cable so do not pull too far away.

  6. GoPro Karma Landing Gear Replacement: 手順 6、 2の画像 1 GoPro Karma Landing Gear Replacement: 手順 6、 2の画像 2
    • Flip over the landing gear and locate the cable connector.

    • Use your thumbnail to disconnect the cable and free the landing gear.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

1人の作成者と共同作成されました。

Jay Ingram

メンバー登録日: 04/19/18

334 ポイント

3のガイドは作成済み

チーム

Cal Poly, Team S25-G14, Maness Spring 2018 Cal Poly, Team S25-G14, Maness Spring 2018人のメンバー

CPSU-MANESS-S18S25G14

4 メンバー

6のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 6

過去 30 日: 8

今までの合計 591