GoPro Hero Casing Replacement

はじめに

In order to replace or fix components in this camera, it is necessary to take of the back and get to the "guts" of the camera. This is because the camera does not come out of the case.

必要な工具と部品

手順1 Casing

GoPro Hero Casing Replacement, Casing: 手順 1、 1の画像 1

Power off your GoPro before beginning disassembly.
Unclip the black latch to the camera case and open the case.

編集

手順2

Gently pry the back open by inserting a metal spudger between the case and back panel.

編集

手順3

Disconnect the battery from the motherboard by unplugging the red, white, and black wires from the white adapter.

編集

手順4

Disconnect the ribbon cable from the lens by lifting the black latch and gently pulling the ribbon cable from the socket.

編集

手順5

Use a Phillips screwdriver (PH000) to remove the four screws around the white plastic piece.
Make sure to keep track of these screws as they are very small.

編集