修理を始めるには コミュニティ ストア

GermGuardian AC4825E UV-C Bulb Replacement

はじめに

The UV-C bulb is a vital tool for the GermGuardian AC4825E. The light eliminates bacteria, spores, and other microorganisms in the air to assist with air purification. When this bulb goes out, the UV bulb change indicator near the control panel on top of the purifier will flash blue. When this happens, it's time to replace the UV-C bulb. This guide will demonstrate the removal process for the UV-C bulb.

必要な工具と部品

  1. GermGuardian AC4825E UV-C Bulb Replacement, HEPA Filter Unit: 手順 1、 1の画像 1

    • Check if the purifier's power cord is plugged into an electrical outlet.

    • If it is plugged in, unplug the power cord.

    編集

  2. GermGuardian AC4825E UV-C Bulb Replacement: 手順 2、 2の画像 1 GermGuardian AC4825E UV-C Bulb Replacement: 手順 2、 2の画像 2

    • Grab the rear cover of the purifier with one finger on the Lock and Release button.

    • Press the button down, and pull the rear cover away from the purifier.

    編集

  4. GermGuardian AC4825E UV-C Bulb Replacement: 手順 3、 3の画像 1 GermGuardian AC4825E UV-C Bulb Replacement: 手順 3、 3の画像 2 GermGuardian AC4825E UV-C Bulb Replacement: 手順 3、 3の画像 3

    • Use your hands to pull the HEPA filter out of the purifier.

    • After reassembly, push & hold the UV control button for 5 seconds to reset the filter change indicator.

    編集

  5. GermGuardian AC4825E UV-C Bulb Replacement, UV-C Bulb: 手順 4、 1の画像 1

    • Remove the two screws from the metal UV-C shield by turning the screws counter-clockwise using a Phillips #00 screwdriver.

    • Grab and pull the UV-C shield away from the purifier to remove it.

    編集

  6. GermGuardian AC4825E UV-C Bulb Replacement: 手順 5、 3の画像 1 GermGuardian AC4825E UV-C Bulb Replacement: 手順 5、 3の画像 2 GermGuardian AC4825E UV-C Bulb Replacement: 手順 5、 3の画像 3

    • Using a tissue or a clean cloth, reach into the exposed space and grab the UV-C bulb.

    • Pull the UV-C bulb out of the exposed space to remove the bulb from its socket.

    • After reassembly, press and hold the UV control button for 5 seconds to reset the UV bulb change indicator.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

1人の作成者と共同作成されました。

Tim Lourenco

メンバー登録日: 03/28/22

305 ポイント

2のガイドは作成済み

バッジ: 5

+2 個以上のバッジ

チーム

UMass Dartmouth, Team 2-1, Mellen Spring 2022 UMass Dartmouth, Team 2-1, Mellen Spring 2022人のメンバー

UMASSD-MELLEN-S22S2G1

4 メンバー

2のガイドは作成済み

コメント 1 件

you end after you pull the bulb out. do you put another bulb in (of course) is there a right/wrong way (which side up or down) then do you plug it back in prior to holding the uv button 5 seconds? do you turn it on prior to holding the uv button 5 seconds? Please explain in detail what I should do.

william estes - 返信

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 12

過去 30 日: 87

今までの合計 1,672