Flip phone over so its backside is facing up.
  • Flip phone over so its backside is facing up.

コメントを追加する

Push from indentation and slide battery cover away from phone to remove battery cover.
  • Push from indentation and slide battery cover away from phone to remove battery cover.

コメントを追加する

Hold battery upwards so you see “This side up”
  • Hold battery upwards so you see “This side up”

コメントを追加する

Using a philips screwdriver, unscrew all 4 screws along the edge of the phone
  • Using a philips screwdriver, unscrew all 4 screws along the edge of the phone

コメントを追加する

Using your plastic pry tool, slide the tool between the phone’s keypad cover and back cover. Using your plastic pry tool, slide the tool between the phone’s keypad cover and back cover.
  • Using your plastic pry tool, slide the tool between the phone’s keypad cover and back cover.

コメントを追加する

You should be able to see the motherboard. Don’t separate the two covers. They should be held together by a screw at the axis of the phone.
  • You should be able to see the motherboard. Don’t separate the two covers. They should be held together by a screw at the axis of the phone.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Jack Foley

メンバー登録日: 2013年04月25日

28 ポイント

6のガイドは作成済み

チーム

Cal Poly, Team 13-62, Johann Spring 2013 Cal Poly, Team 13-62, Johann Spring 2013人のメンバー

CPSU-JOHANN-S13S13G62

4 メンバー

14のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 1

今までの合計 260