メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

Replacing the fan will require removal of other parts such as the motherboard, keyboard and the shroud surrounding the keyboard in order to gain access to the fan.

パーツ

パーツは指定されていません。

  1. Locate the top of the keyboard, then insert a spudger into the top most edge of the keyboard where it meets the bezel surrounding it. When working with electronics, it's important to choose a tool that's ESD-safe to avoid accidental damage to the device. The metal spudger is great when you need serious prying power, but a regular black nylon spudger should be used whenever possible.
    • Locate the top of the keyboard, then insert a spudger into the top most edge of the keyboard where it meets the bezel surrounding it.

    • When working with electronics, it's important to choose a tool that's ESD-safe to avoid accidental damage to the device. The metal spudger is great when you need serious prying power, but a regular black nylon spudger should be used whenever possible.

  2. Using the spudger, lift the keyboard from its base to expose the underside components.
    • Using the spudger, lift the keyboard from its base to expose the underside components.

  3. The Essential Toolkit

    コンパクト版iFixitキットの中で最も利便性の高いツール

    ショップを見る

    The Essential Toolkit

    コンパクト版iFixitキットの中で最も利便性の高いツール

    ショップを見る
  4. Using a #4 phillips screwdriver, remove all six 2.3mm screws from the plastic shroud. Then, lift off the shroud to reveal the motherboard beneath.
    • Using a #4 phillips screwdriver, remove all six 2.3mm screws from the plastic shroud.

    • Then, lift off the shroud to reveal the motherboard beneath.

  5. The motherboard is now readily accessible to be removed. Using a spudger, gently pry the ports away from their side port containers to easily remove it.
    • The motherboard is now readily accessible to be removed.

    • Using a spudger, gently pry the ports away from their side port containers to easily remove it.

  6. Lift the motherboard up and flip it on its back. With the motherboard flipped, the fan is almost ready to be removed.
    • Lift the motherboard up and flip it on its back.

    • With the motherboard flipped, the fan is almost ready to be removed.

  7. Locate the fan and its copper heat pipe running just behind it. Remove the fan from the heat pipe using slight force as it is held to the pipe with an adhesive tape.
    • Locate the fan and its copper heat pipe running just behind it.

    • Remove the fan from the heat pipe using slight force as it is held to the pipe with an adhesive tape.

終わりに

To reassemble your device, follow these instructions in reverse order.

Minh Harper

メンバー登録日: 2016年10月11日

132 ポイント

1ガイドが承認済み

チーム

USF Tampa, Team 1-5, Leahy Fall 2016 USF Tampa, Team 1-5, Leahy Fall 2016人のメンバー

USFT-LEAHY-F16S1G5

3 メンバー

10のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 343