メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

Is your computer making loud noises and taking longer than normal to boot? Consider using this guide to replace the cooling fan in your device.

  1. Make sure to power down and turn off the laptop before proceeding with this guide.
    • Make sure to power down and turn off the laptop before proceeding with this guide.

    • Flip over the laptop.

  2. Slide the tab to the left and hold the tab there. While holding down the sliding tab, remove the battery from the device.
    • Slide the tab to the left and hold the tab there.

    • While holding down the sliding tab, remove the battery from the device.

  3. After removing the battery,  remove 15  7mm screws using the Phillip #1 Screwdriver. After removing the battery,  remove 15  7mm screws using the Phillip #1 Screwdriver.
    • After removing the battery, remove 15 7mm screws using the Phillip #1 Screwdriver.

  4. 全てのタブを開く

    Mac用RAMアップグレードキット

    キット商品を見る

    どれだけタブを開いても
    十分に足りるRAM容量

    キット商品を見る
  5. Flip over the laptop and open it so the screen is facing you.
    • Flip over the laptop and open it so the screen is facing you.

  6. Lift the upper case cover off of the device. Use a prying tool along the edges if necessary.
    • Lift the upper case cover off of the device. Use a prying tool along the edges if necessary.

  7. Remove the twelve 3mm screws using the Phillips #00 screwdriver.
    • Remove the twelve 3mm screws using the Phillips #00 screwdriver.

  8. Gently lift and remove the motherboard off of device. This will also remove the fan from the device but it will remain attached to the motherboard.
    • Gently lift and remove the motherboard off of device.

    • This will also remove the fan from the device but it will remain attached to the motherboard.

  9. Remove the four 3mm screws attaching the fan to motherboard using the Phillips #00 screwdriver.
    • Remove the four 3mm screws attaching the fan to motherboard using the Phillips #00 screwdriver.

  10. Gently lift the fan and disconnect the fan from the motherboard. Remove the fan from the device.
    • Gently lift the fan and disconnect the fan from the motherboard.

    • Remove the fan from the device.

終わりに

To reassemble your device, follow these instructions in reverse order.

Kelsey Rodrigues

メンバー登録日: 2018年10月23日

495 ポイント

5のガイドは作成済み

チーム

UMass Dartmouth, Team S1-G1, Simcock Fall 2018 UMass Dartmouth, Team S1-G1, Simcock Fall 2018人のメンバー

UMASSD-SIMCOCK-F18S1G1

3 メンバー

10のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 40