メインコンテンツにスキップ

Gateway 600YG2 LCD Replacement

必要な工具と部品

  1. Gateway 600YG2 LCD Replacement, Battery: 手順 1、 1の画像 1
    • Flip the laptop over.

    • Slide the battery release tab to the right with your index finger to open the battery cover.

  2. Gateway 600YG2 LCD Replacement: 手順 2、 1の画像 1
    • Remove the battery cover using the tab on the right side.

    • Take the battery out with your index finger.

  3. Gateway 600YG2 LCD Replacement, Power Button Panel: 手順 3、 1の画像 1
    • Insert the spudger between the "sysrq" and "ins" keys.

    • Gently pry free the power button panel above the keyboard, beginning from the right and moving to the left.

  4. Gateway 600YG2 LCD Replacement, LCD: 手順 4、 1の画像 1
    • Remove the five screws with a Phillips #0 screwdriver.

    • The LCD hinge covers are held in place by four screws. One screw is for grounding the LCD.

    • Lift the hinge covers along the outer edges with the spudger until they are released.

  5. Gateway 600YG2 LCD Replacement: 手順 5、 1の画像 1
    • Gently unplug the LCD from the system board.

  6. Gateway 600YG2 LCD Replacement: 手順 6、 1の画像 1
    • Using the Phillips #0 screwdriver, remove six screws that hold the LCD to the hinge.

  7. Gateway 600YG2 LCD Replacement: 手順 7、 1の画像 1
    • Check if any cables are still connected before pulling out the LCD.

    • Remove the cable by gently pulling it out while holding down the LCD.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

7人の作成者と共同で作成されました。

Elizabeth Mazer

メンバー登録日: 10/14/10

78 ポイント

10のガイドは作成済み

チーム

Cal Poly, Team 20-10, Maness Fall 2010 Cal Poly, Team 20-10, Maness Fall 2010人のメンバー

CPSU-MANESS-F10S20G10

3 メンバー

22のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 1,871