メインコンテンツにスキップ

Garmin Nuvi 42LM Battery Replacement

必要な工具と部品

  1. Garmin Nuvi 42LM Battery Replacement, Battery: 手順 1、 3の画像 1 Garmin Nuvi 42LM Battery Replacement, Battery: 手順 1、 3の画像 2 Garmin Nuvi 42LM Battery Replacement, Battery: 手順 1、 3の画像 3
    • Remove the four screws on the back of the GPS using the T5 Torx screwdriver.

  2. Garmin Nuvi 42LM Battery Replacement: 手順 2、 3の画像 1 Garmin Nuvi 42LM Battery Replacement: 手順 2、 3の画像 2 Garmin Nuvi 42LM Battery Replacement: 手順 2、 3の画像 3
    • Pry the GPS open using a plastic opening tool.

    • When prying open the device, use caution to avoid damaging the motherboard.

  3. Garmin Nuvi 42LM Battery Replacement: 手順 3、 3の画像 1 Garmin Nuvi 42LM Battery Replacement: 手順 3、 3の画像 2 Garmin Nuvi 42LM Battery Replacement: 手順 3、 3の画像 3
    • Using the T5 Torx screwdriver, remove the two screws located on the motherboard.

    • There are two screws - one in the back and one in the front.

  4. Garmin Nuvi 42LM Battery Replacement: 手順 4、 1の画像 1
    • Move the motherboard from from its designated location on the GPS.

    • Do not pull on red, green, and black cables when repositioning the motherboard.

  5. Garmin Nuvi 42LM Battery Replacement: 手順 5、 2の画像 1 Garmin Nuvi 42LM Battery Replacement: 手順 5、 2の画像 2
    • Gently unplug the red, green, and black bundled cable to remove the battery.

  6. Garmin Nuvi 42LM Battery Replacement: 手順 6、 2の画像 1 Garmin Nuvi 42LM Battery Replacement: 手順 6、 2の画像 2
    • Use blue plastic opening tool to carefully pry the battery from the GPS.

    • You might need to use additional force when prying because there is adhesive glue on the back of the battery.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

3人の作成者と共同で作成されました。

Charlene Gray

メンバー登録日: 01/18/17

143 ポイント

1ガイドが承認済み

チーム

Eastern Washington University, Team 2-1, Crane Winter 2017 Eastern Washington University, Team 2-1, Crane Winter 2017人のメンバー

EWU-CRANE-W17S2G1

4 メンバー

6のガイドは作成済み

コメント 1 件

on my Nuvi 55-diconnected ribbon cable by accident. When I reconnect I get a white screen. How to get the terminals to line up correctly?

Mike - 返信

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 1

過去 30 日: 8

今までの合計 1,275