メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

This device can be identified utilizing the criterion on the device page. When replacing the motherboard, be sure to set aside the following tools: T5 Torx screwdriver, PH #0 screwdriver, and plastic opening tool.

  1. Carefully remove model/serial number sticker.
    • Carefully remove model/serial number sticker.

  2. Remove two 4mm T5 Torx screws located under the sticker.
    • Remove two 4mm T5 Torx screws located under the sticker.

  3. Once screws are removed, use the plastic opening tool to carefully separate the body from the screen encasing. Once screws are removed, use the plastic opening tool to carefully separate the body from the screen encasing.
    • Once screws are removed, use the plastic opening tool to carefully separate the body from the screen encasing.

  4. Once the body of the nüvi is separated, carefully flip the tabs on the motherboard that secure the ribbon cable to the motherboard and disconnect.
    • Once the body of the nüvi is separated, carefully flip the tabs on the motherboard that secure the ribbon cable to the motherboard and disconnect.

  5. Once the body of the nüvi is separated and the ribbon cable is disconnected, remove the three 1.6mm Phillips #0 screws.
    • Once the body of the nüvi is separated and the ribbon cable is disconnected, remove the three 1.6mm Phillips #0 screws.

  6. Carefully disconnect the two cables connecting the battery to the motherboard and remove motherboard.
    • Carefully disconnect the two cables connecting the battery to the motherboard and remove motherboard.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Hunter Johnson

メンバー登録日: 2018年03月27日

327 ポイント

2のガイドは作成済み

チーム

IUPUI, Team S3-G5, Harley Spring 2018 IUPUI, Team S3-G5, Harley Spring 2018人のメンバー

IUPUI-HARLEY-S18S3G5

3 メンバー

2のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 1

今までの合計 223