メインコンテンツにスキップ

はじめに

Replace a cracked or malfunctioning display/touch screen to your Garmin NUVI 2589LMT device. Replacing the the display screen requires careful attention to detail, but requires a small amount of time.

パーツ

パーツは指定されていません。

  1. Using the T5 Torx Screwdriver, remove all 4 of the 5.7mm screws from the back of the device.
    • Using the T5 Torx Screwdriver, remove all 4 of the 5.7mm screws from the back of the device.

  2. PCラップトップ用バッテリー

    An easy fix for a big power boost.

    ショップを見る

    PCラップトップ用バッテリー

    An easy fix for a big power boost.

    ショップを見る
  3. Using the plastic opening tools, pry the shorter sides of the device apart. Once a gap has formed at the top of the device, insert the opening tool into the gap and slide it along the top of the device. Repeat for the bottom edge of the device to separate the LCD screen from the back.
    • Using the plastic opening tools, pry the shorter sides of the device apart.

    • Once a gap has formed at the top of the device, insert the opening tool into the gap and slide it along the top of the device. Repeat for the bottom edge of the device to separate the LCD screen from the back.

    • Do not disconnect or tear the ribbon wiring, located at the bottom of the motherboard, when removing the back of the device.

  4. Using the tweezers, gently pull the ribbon wiring near where it connects to the motherboard to disconnect the ribbon wiring and the display screen from the motherboard.
    • Using the tweezers, gently pull the ribbon wiring near where it connects to the motherboard to disconnect the ribbon wiring and the display screen from the motherboard.

    • Remove the screen from the device.

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Adam Ferraro

メンバー登録日: 2016年10月04日

920 ポイント

8のガイドは作成済み

チーム

USF Tampa, Team 1-2, Nance Fall 2016 USF Tampa, Team 1-2, Nance Fall 2016人のメンバー

USFT-NANCE-F16S1G2

4 メンバー

8のガイドは作成済み

Could you please advise where can I find replacement screen for this device

joyarvind - 返信

I got the ribbon off. There is a plastic piece that flops around that the ribbon was adhered to. Will the replacement ribbon have some type of adhesive on it for installation? Thanks.

Marty Griffin - 返信

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 24

今までの合計 1,702