メインコンテンツにスキップ

このバージョンは誤った内容を含んでいる可能性があります。最新の承認済みスナップショットに切り替えてください。

必要条件のみ
この修理ガイドは、他のガイドの前提条件として使用されます。それ自体は不完全で、単独で使用されることはありません。

必要な工具と部品

  1. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 1、 1の画像 1
    • Using the T5 Torx Screwdriver, remove all 4 of the 5.7mm screws from the back of the device.

  2. この手順は未翻訳です。 翻訳を手伝う。

    : 手順 2、 2の画像 1 : 手順 2、 2の画像 2
    • Using the plastic opening tools, pry the shorter sides of the device apart.

    • Once a gap has formed at the top of the device, insert the opening tool into the gap and slide it along the top of the device. Repeat for the bottom edge of the device to separate the LCD screen from the back.

    • Do not disconnect or tear the ribbon wiring, located at the bottom of the motherboard, when removing the back of the device.

ゴール

作成者

1人の作成者と共同作成されました。

Adam Ferraro

メンバー登録日: 10/04/16

920 ポイント

8のガイドは作成済み

チーム

USF Tampa, Team 1-2, Nance Fall 2016 USF Tampa, Team 1-2, Nance Fall 2016人のメンバー

USFT-NANCE-F16S1G2

4 メンバー

8のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 28