修理を始めるには コミュニティ ストア

Garmin Nuvi 2557LMT Battery Replacement

はじめに

The tools needed are a T5 Torx screwdriver and a plastic opening tool. The battery is glued to the back of the device and connected to the motherboard with a wire.

必要な工具と部品

  1. Garmin Nuvi 2557LMT Battery Replacement, Garmin Nuvi 2557LMT Disassembly: 手順 1、 1の画像 1

    • Using a T5 Torx screwdriver, remove four 6 mm screws from the four corners of the back of the device.

    翻訳

  2. Garmin Nuvi 2557LMT Battery Replacement: 手順 2、 1の画像 1

    • Grip the device with your hands. Using your thumbs pull the nameplate towards yourself and off the device.

    翻訳

  4. Garmin Nuvi 2557LMT Battery Replacement: 手順 3、 1の画像 1

    • There is a visible separation between the front and the back of the device.

    • Using a plastic opening tool, pry open the device along this separation.

    • Trying to open the device on the opposite side will rip the motherboard-display connector.

    翻訳

  5. Garmin Nuvi 2557LMT Battery Replacement: 手順 4、 2の画像 1 Garmin Nuvi 2557LMT Battery Replacement: 手順 4、 2の画像 2

    • Carefully pull apart the device by opening it up on the opposite side of the nameplate.

    翻訳

  6. Garmin Nuvi 2557LMT Battery Replacement, Battery: 手順 5、 1の画像 1

    • Using a plastic opening tool pry the battery away from the device.

    • The battery might be glued, so it might require a little bit of force to get it out.

    翻訳

  7. Garmin Nuvi 2557LMT Battery Replacement: 手順 6、 1の画像 1

    • Pull the battery-motherboard connector away from the motherboard.

    翻訳
終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

作成者

1人の作成者と共同作成されました。

Danis Terzi

メンバー登録日: 03/31/16

349 ポイント

3のガイドは作成済み

バッジ: 8

+5 個以上のバッジ

チーム

Eastern Washington University, Team 1-3, Giguere Spring 2016 Eastern Washington University, Team 1-3, Giguere Spring 2016人のメンバー

EWU-GIGUERE-S16S1G3

5 メンバー

5のガイドは作成済み

2 件のコメント

On my Nuvi 2557, the silver name bezel is part of the front cover - it does not separate. I just split the case as shown.

The battery connector pulls out perpendicular to the pc board, and you re-insert it by aligning and pressing down against the board.

john horn - 返信

Would this apply to the Nuvi 2555LMT?

Bill Hines - 返信

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 1

過去 30 日: 5

今までの合計 1,203