メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

This guide will show you how to disassemble the Garmin Nuvi 1390LMT GPS to replace the battery.

  1. Snap the plastic cover off using a plastic opening tool.
    • Snap the plastic cover off using a plastic opening tool.

  2. Remove the four black 11 mm T5 torx screws. Remove the four black 11 mm T5 torx screws.
    • Remove the four black 11 mm T5 torx screws.

  3. Pop the screen cover off with a plastic opening tool.
    • Pop the screen cover off with a plastic opening tool.

  4. The Essential Toolkit

    コンパクト版iFixitキットの中で最も利便性の高いツール

    ショップを見る

    The Essential Toolkit

    コンパクト版iFixitキットの中で最も利便性の高いツール

    ショップを見る
  5. Flip the screen over out of the case. Be sure not to twist or damage the wiring harness connecting the screen to the circuit board.
    • Flip the screen over out of the case.

    • Be sure not to twist or damage the wiring harness connecting the screen to the circuit board.

  6. Remove the two silver 5 mm T5 torx screws connecting the circuit board to the plastic casing.
    • Remove the two silver 5 mm T5 torx screws connecting the circuit board to the plastic casing.

  7. Flip the circuit board over onto the screen. Flip the circuit board over onto the screen.
    • Flip the circuit board over onto the screen.

  8. Disconnect the harness between the battery and the circuit board.
    • Disconnect the harness between the battery and the circuit board.

  9. Peel the battery from the plastic back with a plastic opening tool. It is connected with a glue so be careful.
    • Peel the battery from the plastic back with a plastic opening tool.

    • It is connected with a glue so be careful.

ゴール

3 の人々がこのガイドを完成させました。

Trey Ulsh

メンバー登録日: 2015年10月22日

510 ポイント

3のガイドは作成済み

チーム

Montana Tech, Team 10-4, Shirk Fall 2015 Montana Tech, Team 10-4, Shirk Fall 2015人のメンバー

MTUM-SHIRK-F15S10G4

5 メンバー

3のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 12

今までの合計 2,634