メインコンテンツにスキップ

パーツ

パーツは指定されていません。

  1. Turn the device screen down and using  the screwdriver remove all eight screws from the back plate. Turn the device screen down and using  the screwdriver remove all eight screws from the back plate.
    • Turn the device screen down and using the screwdriver remove all eight screws from the back plate.

  2. Place a nylon spudger in the seam between the front and back panel and carefully lift around the edge of the device.
    • Place a nylon spudger in the seam between the front and back panel and carefully lift around the edge of the device.

  3. Use the spudger to pry apart the screen from all around the device.
    • Use the spudger to pry apart the screen from all around the device.

    • Gently lift the screen so not to disconnect the ribbon attaching the screen to the motherboard.

  4. After you've removed the back cover, you will see a copper colored ribbon connected to a grey hinge. Carefully remove the hinge from the cord using a spudger and the ribbon will come out.
    • After you've removed the back cover, you will see a copper colored ribbon connected to a grey hinge.

    • Carefully remove the hinge from the cord using a spudger and the ribbon will come out.

    • The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.

    • Make sure to wear an anti-static wrist strap when handling the motherboard.

  5. Now you have the screen, which is enclosed by another cover. Remove the eight screws that hold it in place. Now you have the screen, which is enclosed by another cover. Remove the eight screws that hold it in place. Now you have the screen, which is enclosed by another cover. Remove the eight screws that hold it in place.
    • Now you have the screen, which is enclosed by another cover. Remove the eight screws that hold it in place.

  6. Once the screws have been taken out, use a spudger to carefully remove the cover. With this cover removed, the screen is now completely exposed.
    • Once the screws have been taken out, use a spudger to carefully remove the cover. With this cover removed, the screen is now completely exposed.

終わりに

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

Aleem Waris

メンバー登録日: 2016年10月10日

146 ポイント

1ガイドが承認済み

チーム

USF Tampa, Team 1-3, Lacy Fall 2016 USF Tampa, Team 1-3, Lacy Fall 2016人のメンバー

USFT-LACY-F16S1G3

4 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 29

今までの合計 2,134