1. Place the Game Boy Pocket face-down on a clean, flat surface.
    • Place the Game Boy Pocket face-down on a clean, flat surface.

    • Use a Y1 tri-wing screwdriver and turn counterclockwise to remove the four external screws.

    • Use a Y1 tri-wing screwdriver and turn counterclockwise to remove the two screws inside the battery compartment.

    コメントを追加する

  2. Place your hands on the front and back covers of the Game Boy Pocket, and carefully separate the device.
    • Place your hands on the front and back covers of the Game Boy Pocket, and carefully separate the device.

      • Set the back cover aside. You will need it to reassemble the device

    コメントを追加する

    • Use a Phillips #1 screwdriver and turn counterclockwise to remove the three screws on the motherboard.

    コメントを追加する

    • Use a plastic opening tool to dislodge and remove the clip securing the ribbon cable.

      • Make sure you apply pressure on both sides of the clip to loosen it.

    コメントを追加する

    • Use a plastic opening tool to dislodge the ribbon cable.

      • Be gentle to prevent tearing the ribbon.

    コメントを追加する

    • Grab the black piece protruding from the motherboard, and lift up to remove the motherboard.

      • Set the motherboard aside. You will need it to reassemble the device.

    コメントを追加する

    • Use your fingers to remove the three silicone button covers.

    • Use a plastic opening tool to remove the buttons.

    コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Adriana Rahrig

メンバー登録日: 2014年10月07日

893 ポイント

5のガイドは作成済み

チーム

USF Tampa, Team 1-1, Leahy Fall 2014 USF Tampa, Team 1-1, Leahy Fall 2014人のメンバー

USFT-LEAHY-F14S1G1

4 メンバー

10のガイドは作成済み

コメント1件

where can you just buy the a and b buttons (if possible)

Eian Anderson - 返信

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 21

今までの合計 1,788