はじめに

Is the outside shell of your Game Boy cracked, damaged, or you're just getting sick of your old housing? This guide outlines how to get down to the front housing so you can swap it out!

Locate the battery compartment on the back of the Game Boy Color. Push down on the tab and hinge the cover downwards and outwards to remove the battery cover.
  • Locate the battery compartment on the back of the Game Boy Color.

  • Push down on the tab and hinge the cover downwards and outwards to remove the battery cover.

コメントを追加する

Remove the batteries from the battery compartment.
  • Remove the batteries from the battery compartment.

コメントを追加する

Using a Y1 screwdriver, remove the six screws on the back of the device as pictured.  The bottom two screws are located inside of the battery compartment.
  • Using a Y1 screwdriver, remove the six screws on the back of the device as pictured. The bottom two screws are located inside of the battery compartment.

コメントを追加する

Gently lift and separate the back housing from the rest of the device.  Now you've got the back housing out! Gently lift and separate the back housing from the rest of the device.  Now you've got the back housing out!
  • Gently lift and separate the back housing from the rest of the device. Now you've got the back housing out!

コメントを追加する

Push up on the tabs on either side of the ribbon with a spudger.
  • Push up on the tabs on either side of the ribbon with a spudger.

コメントを追加する

Gently remove the ribbon cable from the port
  • Gently remove the ribbon cable from the port

コメントを追加する

Using the Phillips #1 screwdriver, remove the 3 screws shown in the picture. Using the Phillips #1 screwdriver, remove the 3 screws shown in the picture.
  • Using the Phillips #1 screwdriver, remove the 3 screws shown in the picture.

コメントを追加する

Gently lift the motherboard from the front housing.
  • Gently lift the motherboard from the front housing.

コメントを追加する

Remove the rubber backing on each button grouping.
  • Remove the rubber backing on each button grouping.

コメントを追加する

Remove the original buttons from the housing.
  • Remove the original buttons from the housing.

コメントを追加する

Gently pry and lift the LCD Display from the front panel. Twisting the front casing may help gain more leverage.
  • Gently pry and lift the LCD Display from the front panel.

    • Twisting the front casing may help gain more leverage.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

11 の人々がこのガイドを完成させました。

Angela Yoeurng

メンバー登録日: 2013年01月18日

932 ポイント

5のガイドは作成済み

チーム

Cal Poly, Team 19-47, Regan Winter 2013 Cal Poly, Team 19-47, Regan Winter 2013人のメンバー

CPSU-REGAN-W13S19G47

4 メンバー

24のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 2

過去 7 日: 7

過去 30 日: 71

今までの合計 4,904