メインコンテンツにスキップ

Game Boy Color Buttons Replacement

必要な工具と部品

  1. Game Boy Color Buttons Replacement, Battery: 手順 1、 2の画像 1 Game Boy Color Buttons Replacement, Battery: 手順 1、 2の画像 2
    • Locate the battery compartment on the back of the Game Boy Color.

    • Push down on the tab and hinge the cover downwards and outwards to remove the battery cover.

  2. Game Boy Color Buttons Replacement: 手順 2、 1の画像 1
    • Remove the batteries from the battery compartment.

  3. Game Boy Color Buttons Replacement, Back Housing: 手順 3、 1の画像 1
    • Using a Y1 screwdriver, remove the six screws on the back of the device as pictured. The bottom two screws are located inside of the battery compartment.

  4. Game Boy Color Buttons Replacement: 手順 4、 2の画像 1 Game Boy Color Buttons Replacement: 手順 4、 2の画像 2
    • Gently lift and separate the back housing from the rest of the device. Now you've got the back housing out!

  5. Game Boy Color Buttons Replacement, LCD Ribbon Cable: 手順 5、 1の画像 1
    • Push up on the tabs on either side of the ribbon with a spudger.

  6. Game Boy Color Buttons Replacement: 手順 6、 1の画像 1
    • Gently remove the ribbon cable from the port

  7. Game Boy Color Buttons Replacement, Motherboard: 手順 7、 2の画像 1 Game Boy Color Buttons Replacement, Motherboard: 手順 7、 2の画像 2
    • Using the Phillips #1 screwdriver, remove the 3 screws shown in the picture.

  8. Game Boy Color Buttons Replacement: 手順 8、 1の画像 1
    • Gently lift the motherboard from the front housing.

  9. Game Boy Color Buttons Replacement, Buttons: 手順 9、 1の画像 1
    • Remove the rubber backing on each button grouping.

  10. Game Boy Color Buttons Replacement: 手順 10、 1の画像 1
    • Remove the original buttons from the housing.

終わりに

To reassemble your device, follow these instructions in reverse order.

24 の人々がこのガイドを完成させました。

作成者

5人の作成者と共同で作成されました。

Nick Katsantones

メンバー登録日: 01/18/13

946 ポイント

4のガイドは作成済み

チーム

Cal Poly, Team 19-47, Regan Winter 2013 Cal Poly, Team 19-47, Regan Winter 2013人のメンバー

CPSU-REGAN-W13S19G47

4 メンバー

56のガイドは作成済み

2 件のコメント

Thank you for your information on repair of my color game boy.

just two things.

1. I had a hard time with the removal of the screws. Any tip on that would be helpful.

2. Where can I purchase replacement parts?

Thanks again for all of your help.

Ray Blasko

raymondblasko - 返信

In the tools needed it states Y0 screwdriver, but in step 3 it says Y1 which is not the same. Which one is the correct size?

blogcraft - 返信

コメントを追加

統計データ:

過去 24時間: 9

過去 7 日: 86

過去 30 日: 292

今までの合計 27,844