Lay everything out
  • Lay everything out


Remove the drum key and Allen wrenches from the right side of the primary pedal.
  • Remove the drum key and Allen wrenches from the right side of the primary pedal.


  • Slide the ends of the long black connector onto the sides of the pedals.

    • Both sides of the connection are shaped like a half-circle, so they can only connect in the proper orientation.

    • Ensure all the screws on the connector are pointing up. To do so, you will need to "wind" the secondary pedal up manually before attaching the connector.


  • Insert the beaters into the primary pedal.

    • You can choose to use either side of the beaters - just be consistent!


  • Arrange the pedals in the drumkit. The primary pedal should be centered on the kick drum, while the secondary pedal should be wherever comfortable.

  • If necessary use the drum key to adjust the height of the beaters to be vertically centered on the kick drum.

  • Now tighten everything down!


  • Tighten and loosen the nuts on the bottom of the springs until both pedals have an even, comfortable tension.


  • Replace the tools in the pedal for safe-keeping.

  • Bag the extra parts in case you want to convert your double-bass pedal into two singles.


  • Pound out some sick beats!



5 の人々がこのガイドを完成させました。

James Pearson Hughes

メンバー登録日: 2010年05月27日

617 ポイント



eXifiters eXifiters人のメンバー


1 メンバー



Nice to see some double bass enthusiasts on here! I am in the process of building an electronic midi drumset from piezos, some old stationary cardio equipment and an alesis dm5. The tooling, oh the tooling. Taps and dies, welding, now i need a lathe to make a double bass pedal from scratch... is a great resource for technical info and also creepy government technology. Ill post when i can. Peace

Scott Haddox - 返信



過去 24時間: 0

過去 7 日: 7

過去 30 日: 32

今までの合計 1,843