メインコンテンツにスキップ

GBC Creative Laminator Gear Replacement

必要な工具と部品

  1. GBC Creative Laminator Gear Replacement, Gear: 手順 1、 2の画像 1 GBC Creative Laminator Gear Replacement, Gear: 手順 1、 2の画像 2
    • Using the Phillips #2 screwdriver, remove ten 12 mm long screws on the bottom of the device.

  2. GBC Creative Laminator Gear Replacement: 手順 2、 1の画像 1
    • Open the top of the device, and the inside of the Laminator will be exposed as shown.

  3. GBC Creative Laminator Gear Replacement: 手順 3、 3の画像 1 GBC Creative Laminator Gear Replacement: 手順 3、 3の画像 2 GBC Creative Laminator Gear Replacement: 手順 3、 3の画像 3
    • Using the Phillips #2 screwdriver, remove the two 9 mm long screws on the side of the main component that fix the motor in place.

    • Pull the motor off of the main internal component to reveal the gear.

  4. GBC Creative Laminator Gear Replacement: 手順 4、 1の画像 1
    • Pull the gear off of the motor.

終わりに

To reassemble your device, follow these instructions in reverse order.

4 の人々がこのガイドを完成させました。

作成者

2人の作成者と共同で作成されました。

Yujia Tang

メンバー登録日: 07/11/18

384 ポイント

2のガイドは作成済み

チーム

IUPUI, Team S1-G1, Wilson Summer 2018 IUPUI, Team S1-G1, Wilson Summer 2018人のメンバー

IUPUI-WILSON-SU18S1G1

5 メンバー

4のガイドは作成済み

コメント 1 件

Can you tell me where I might find a replacement gear for my GBC H200? I would like to find a brass gear but mine melted and need to find a replacement but no info for the gear. I think it is 17 teeth but not sure about the rest.

Jim Pruitt - 返信

コメントを追加

統計データ:

過去 24時間: 3

過去 7 日: 14

過去 30 日: 62

今までの合計 3,274