メインコンテンツにスキップ

はじめに

The main purpose of this page is to assure the owner of a Fujifilm Instax Mini 8 is capable of disassembling the camera in order to remove and replace the Flash Unit, if there was to ever be any problems with the flash. Before attempting repairs, please take note of certain risks of receiving shock from the camera's flash capacitor. Also make sure to ground yourself before operating on the camera's motherboard or you might discharge static to crucial components.

  1. You start off with the camera. You start off with the camera.
    • You start off with the camera.

  2. Open up the back and remove the film cartridge. Open up the back and remove the film cartridge.
    • Open up the back and remove the film cartridge.

  3. Remove screws from bottom of camera with a small #00 Phillips Screwdriver. Then remove screws around the camera. Additionally, there are two screws in the battery compartment which also need to be removed Remove screws from bottom of camera with a small #00 Phillips Screwdriver. Then remove screws around the camera. Additionally, there are two screws in the battery compartment which also need to be removed
    • Remove screws from bottom of camera with a small #00 Phillips Screwdriver. Then remove screws around the camera. Additionally, there are two screws in the battery compartment which also need to be removed

  4. PCラップトップ用バッテリー

    An easy fix for a big power boost.

    ショップを見る

    PCラップトップ用バッテリー

    An easy fix for a big power boost.

    ショップを見る
  5. Once all screws are removed, gently pry open the front casing with your hands or a prying tool. Do note that there will be a spring that attaches the front casing and the main circuit board, so take care as to not break the spring. Once all screws are removed, gently pry open the front casing with your hands or a prying tool. Do note that there will be a spring that attaches the front casing and the main circuit board, so take care as to not break the spring. Once all screws are removed, gently pry open the front casing with your hands or a prying tool. Do note that there will be a spring that attaches the front casing and the main circuit board, so take care as to not break the spring.
    • Once all screws are removed, gently pry open the front casing with your hands or a prying tool. Do note that there will be a spring that attaches the front casing and the main circuit board, so take care as to not break the spring.

  6. You should now be able to see the flash unit. Take care to not touch the large black capacitor on the top. It will still have a charge and will hurt.
    • You should now be able to see the flash unit. Take care to not touch the large black capacitor on the top. It will still have a charge and will hurt.

  7. Unscrew the two screws attaching the flash to the main circuit board. The flash unit will detach away from the motherboard, now leaving just the connecting wires to remove next. Unscrew the two screws attaching the flash to the main circuit board. The flash unit will detach away from the motherboard, now leaving just the connecting wires to remove next.
    • Unscrew the two screws attaching the flash to the main circuit board. The flash unit will detach away from the motherboard, now leaving just the connecting wires to remove next.

  8. With a solder kit, heat the connecting solder points to open the connection, thus removing the connecting wires. There are many ways to do this, depending on the available tools on hand. With a solder kit, heat the connecting solder points to open the connection, thus removing the connecting wires. There are many ways to do this, depending on the available tools on hand. With a solder kit, heat the connecting solder points to open the connection, thus removing the connecting wires. There are many ways to do this, depending on the available tools on hand.
    • With a solder kit, heat the connecting solder points to open the connection, thus removing the connecting wires. There are many ways to do this, depending on the available tools on hand.

まとめ

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Boyang Wu

メンバー登録日: 2012年10月02日

705 ポイント

5のガイドは作成済み

チーム

USF Tampa, Team 4-1, Meier Fall 2015 USF Tampa, Team 4-1, Meier Fall 2015人のメンバー

USFT-MEIER-F15S4G1

4 メンバー

6のガイドは作成済み

Where can I purchase the flash unit?

Casey Sanders - 返信

Hi, did you ever find out where to replace the flash light unit?

Rachel Street -

Why is all the camera lights flashing red and doesn't work?

medgabby - 返信

Will the camera work without any flash, or are the connections required for the whole thing to function ?

Hyaku Gen - 返信

Where can I find the flash unit to purchase??

Maria - 返信

コメントを追加する

統計データを表示:

過去 24時間: 9

過去 7 日: 52

過去 30 日: 270

今までの合計 14,693