メインコンテンツにスキップ

はじめに

This guide shows how to remove the exterior case of the Fujifilm FinePix XP80 in order to access the interior and make other repairs or replacements.

パーツ

パーツは指定されていません。

  1. Using a Phillips PH000 bit, remove the five 2mm screws on the bottom of the camera.
    • Using a Phillips PH000 bit, remove the five 2mm screws on the bottom of the camera.

  2. Using a H1.3 hex head bit, remove the two 2mm screws from the top of the camera.
    • Using a H1.3 hex head bit, remove the two 2mm screws from the top of the camera.

  3. Using a H1.3 hex head bit, remove the two 2mm screws on the side of the camera.
    • Using a H1.3 hex head bit, remove the two 2mm screws on the side of the camera.

  4. Using a plastic opening tool, gently pry up the edge of the button case, located at the top of the camera, until it unclips.
    • Using a plastic opening tool, gently pry up the edge of the button case, located at the top of the camera, until it unclips.

  5. Gently pry the side area of the case apart.
    • Gently pry the side area of the case apart.

  6. Continue using the opening tool on the bottom of the camera to gently pry the case apart.
    • Continue using the opening tool on the bottom of the camera to gently pry the case apart.

  7. Use the plastic opening tool to carefully pry the yellow front panel completely away from the camera. Use your hands to take off the yellow back panel.
    • Use the plastic opening tool to carefully pry the yellow front panel completely away from the camera.

    • Use your hands to take off the yellow back panel.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Busra Atalay

メンバー登録日: 2016年09月29日

49 ポイント

2のガイドは作成済み

チーム

USF Tampa, Team 1-3, Cagle Fall 2016 USF Tampa, Team 1-3, Cagle Fall 2016人のメンバー

USFT-CAGLE-F16S1G3

5 メンバー

14のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 59