はじめに

The LCD screen is required to operate your camera. If yours is not working, it needs to be replaced. This guide will show you how to do that.

パーツ

パーツは必要ありません。

  1. Unscrew the six 3.5mm Philips head from the outer casing. Unscrew the six 3.5mm Philips head from the outer casing. Unscrew the six 3.5mm Philips head from the outer casing.
    • Unscrew the six 3.5mm Philips head from the outer casing.

  2. Open the battery chamber and remove the battery. Pry the front half of the casing from the camera. Be careful that the sensor cover—the small piece of translucent plastic—doesn't fall out of place. Return it to its original location if it does.
    • Open the battery chamber and remove the battery.

    • Pry the front half of the casing from the camera.

    • Be careful that the sensor cover—the small piece of translucent plastic—doesn't fall out of place. Return it to its original location if it does.

  3. Free shipping on all orders over $100.00 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  4. Pry the back half of the casing from the camera. Be careful when maneuvering the camera without the casing on as the LCD screen is not fastened to anything.
    • Pry the back half of the casing from the camera.

    • Be careful when maneuvering the camera without the casing on as the LCD screen is not fastened to anything.

  5. Lift the LCD screen out of the camera. There is a tab that keeps in place the ribbon that attaches the screen and motherboard. Lift this up using the spudger and disconnect the screen from the motherboard. There is a tab that keeps in place the ribbon that attaches the screen and motherboard. Lift this up using the spudger and disconnect the screen from the motherboard.
    • Lift the LCD screen out of the camera.

    • There is a tab that keeps in place the ribbon that attaches the screen and motherboard. Lift this up using the spudger and disconnect the screen from the motherboard.

まとめ

To reassemble your device, follow these instructions in reverse order.

George Lindner

メンバー登録日: 2015年01月20日

237 ポイント

2のガイドは作成済み

チーム

USF Tampa, Team 19-3, Blackwell Winter 2015 USF Tampa, Team 19-3, Blackwell Winter 2015人のメンバー

USFT-BLACKWELL-W15S19G3

4 メンバー

5のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 369