Fujifilm FinePix S4200 Lens Replacement

はじめに

Use this guide to replace the lense in the Fujifilm Finepix S4200. This guide requires the use of a Phillips 000 screwdriver and soldering iron. Previous soldering experience is recommended.

必要な工具と部品

手順1 Lens

Fujifilm FinePix S4200 Lens Replacement, Lens: 手順 1、 1の画像 1

Turn off the camera by pushing the ON/OFF switch as shown.

翻訳

手順2

Fujifilm FinePix S4200 Lens Replacement: 手順 2、 3の画像 3

Using a Phillips #000 screwdriver, remove all of the 4mm screws from the left, right, and bottom of the camera.

翻訳

手順3

Remove casing part pictured by gently pulling up until casing is fully detached.

翻訳

手順4

Fujifilm FinePix S4200 Lens Replacement: 手順 4、 3の画像 3

Remove the 4 mm screws on the metal plate. Then remove the 4 mm screws on left side of the camera, and remove the two 4mm screws on right side.
Use the Phillips #000 to avoid stripping the screws.

翻訳

手順5

Remove orange ribbon cable by gently pulling on the cable until it is detached from the clamping device on the motherboard.
Remove the top casing by pulling upwards.

翻訳

手順6

Carefully remove the LCD screen.
Gently pull on orange tab until it is free. This orange strip is susceptible to tearing.

翻訳

手順7

Remove remaining 4mm screw. Detach metal plate by lifting plate upwards.
Use the Phillips #000 screwdriver.

翻訳

手順8

Remove remaining orange tabs on motherboard by gently pulling on all tab until they are free.
Caution: Orange strips are susceptible to tearing.

翻訳

手順9

Using the Phillips #000 screwdriver, remove the 4mm screws in the corners of the motherboard.

翻訳

手順10

Use a soldering iron to desolder the five connections shown.
Caution: After removing the soldered connections, they must be given ample time to cool before moving to the next step.

翻訳