はじめに

Use this guide to replace the battery door.

パーツ

パーツは必要ありません。

  1. Locate and remove two 6.4mm screws on the bottom of the camera with a Phillips #00 screwdriver.
    • Locate and remove two 6.4mm screws on the bottom of the camera with a Phillips #00 screwdriver.

  2. Locate the battery door.
    • Locate the battery door.

  3. Locate the latch on the battery door.
    • Locate the latch on the battery door.

    • Use your finger pry to it open where it says "BATT."

  4. Pro Tech ツールキットを含むご注文、もしくは総額 $100ドル以上のご注文については送料無料です。

    当社のショップを閲覧する
  5. Remove the battery from the camera by pulling the battery door outward.
    • Remove the battery from the camera by pulling the battery door outward.

  6. Locate and remove three black 3.80mm screws on the back of the black casing with the Phillips #00 screwdriver.
    • Locate and remove three black 3.80mm screws on the back of the black casing with the Phillips #00 screwdriver.

  7. Squeeze the camera placing a thumb on the tab marked CE.
    • Squeeze the camera placing a thumb on the tab marked CE.

    • Pull the back half of the camera firmly away from the camera body.

  8. Locate and remove the 3.80mm screw that holds the plastic strip to the camera body with a Phillips #00 screwdriver. The plastic strip will now come off the camera body.
    • Locate and remove the 3.80mm screw that holds the plastic strip to the camera body with a Phillips #00 screwdriver.

    • The plastic strip will now come off the camera body.

まとめ

To reassemble your device, follow these instructions in reverse order.

Eric Nicolai

メンバー登録日: 2011年01月10日

679 ポイント

6のガイドは作成済み

チーム

Cal Poly, Team 13-5, Forte Winter 2011 Cal Poly, Team 13-5, Forte Winter 2011人のメンバー

CPSU-FORTE-W11S13G5

5 メンバー

6のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 1

過去 7 日: 1

過去 30 日: 4

今までの合計 1,650