はじめに

The footrest can be customized into 4 different positions in order to fit the recipient's height and comfort level.

Familiarize yourself with the tools required for this procedure (listed below) by referencing the Tools Maintenance guide.

Attach the extendable footrest bar to the front frame at the desired height Make sure the two bolt holes on the footrest bar line up with two of the holes on the front frame
  • Attach the extendable footrest bar to the front frame at the desired height

  • Make sure the two bolt holes on the footrest bar line up with two of the holes on the front frame

コメントを追加する

Push a flat head bolt through the hole in the frame. Use the 10mm wrench to secure the nut on the other side of the bolt
  • Push a flat head bolt through the hole in the frame.

  • Use the 10mm wrench to secure the nut on the other side of the bolt

  • Twist the 10mm wrench counter-clockwise to tighten the nut

  • Attach the three other flat-head bolts and nuts to the remaining holes by using the 10mm wrench

コメントを追加する

Attach the footrest to the footrest bar with the bottom of the footrest pointing upwards Match the footrest wedges up with the holes and push 4 small bolts through the holes The heads of the bolts should fit perfectly through the footrest
  • Attach the footrest to the footrest bar with the bottom of the footrest pointing upwards

  • Match the footrest wedges up with the holes and push 4 small bolts through the holes

    • The heads of the bolts should fit perfectly through the footrest

  • Tighten the nuts onto the bolts using the 10mm wrench

  • Make sure the nuts are securely fastened but do not tighten the nuts too tightly

コメントを追加する

Flip the footrest back over and the footrest is now ready for use
  • Flip the footrest back over and the footrest is now ready for use

    • The footrest may be adjusted into 4 different locations depending on the height and comfort level of the recipient

コメントを追加する

To change the footrest's position, repeat the previous steps but move the footrest bar to the preferred position by lining up the footrest bar with the holes on the sides of the frame To change the footrest's position, repeat the previous steps but move the footrest bar to the preferred position by lining up the footrest bar with the holes on the sides of the frame To change the footrest's position, repeat the previous steps but move the footrest bar to the preferred position by lining up the footrest bar with the holes on the sides of the frame
  • To change the footrest's position, repeat the previous steps but move the footrest bar to the preferred position by lining up the footrest bar with the holes on the sides of the frame

コメントを追加する

ゴール

ある他の人がこのガイドを完成しました。

Mike Sevilla

メンバー登録日: 2013年04月05日

180 ポイント

4のガイドは作成済み

チーム

Cal Poly, Team 14-7, Maness Spring 2013 Cal Poly, Team 14-7, Maness Spring 2013人のメンバー

CPSU-MANESS-S13S14G7

5 メンバー

8のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 735