メインコンテンツにスキップ

はじめに

Sometimes the band links will become rusted or scratched. To preserve the beauty of the titanium watch, you can replace a the damaged link with a new one.

パーツ

パーツは指定されていません。

  1. Locate the link on the band with arrows pointing in opposite directions.
    • Locate the link on the band with arrows pointing in opposite directions.

    • Place push pin into the hole on one side of the link.

  2. Hit the push pin with the blunt object (we used scissors) until the small metal rod sticks out from the link.
    • Hit the push pin with the blunt object (we used scissors) until the small metal rod sticks out from the link.

    • Pull the rod out using your fingers.

    • Repeat on the other side to remove the entire link.

  3. To replace the link, insert the open end of one of the connected links into the open end of the new link. Place the rod into the aligning holes and use the blunt object to hammer the rod into the link.
    • To replace the link, insert the open end of one of the connected links into the open end of the new link.

    • Place the rod into the aligning holes and use the blunt object to hammer the rod into the link.

    • Repeat on the other side of the link to remove it completely.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Zachary Price

メンバー登録日: 2015年04月28日

549 ポイント

3のガイドは作成済み

チーム

Cal Poly, Team 14-10, Amido Spring 2015 Cal Poly, Team 14-10, Amido Spring 2015人のメンバー

CPSU-AMIDO-S15S14G10

3 メンバー

5のガイドは作成済み

コメント1件

Looking for 3 extra watch band links for a fossil big tic model jr8622 18mm width could you tell me please how much this will cost please with delivery as well to croydon in Surrey

Kind regards colin

Colin Evans - 返信

コメントを追加

統計データを表示:

過去 24時間: 1

過去 7 日: 2

過去 30 日: 8

今までの合計 664