修理を始めるには コミュニティ ストア

Fossil Q Marshal Gen 2 Motherboard Replacement

はじめに

This repair guide will show you how to replace the motherboard on a Fossil Q Marshal Gen 2 smartwatch. Be careful not to damage the motherboard, wiring, or the metal connectors on your smartwatch.

必要な工具と部品

  1. Fossil Q Marshal Gen 2 Motherboard Replacement, Back Cover: 手順 1、 1の画像 1

    • Squeeze retaining pins together to release chain from watch body. This can be done by hand or with tweezers.

    • Remove chain from opposing side of watch body.

    翻訳

  2. Fossil Q Marshal Gen 2 Motherboard Replacement: 手順 2、 1の画像 1

    • Use tweezers to grip the notches on the back cover, then unscrew the back cover (counter-clockwise) from the watch housing.

    • There is an actual tool made to remove this back cover, using the right tool may save you from scratching the back of watch with tweezers. The backcover tool can be purchased online, a local jeweler may also be willing to remove it for you.

    翻訳

  3. Fossil Q Marshal Gen 2 Motherboard Replacement: 手順 3、 2の画像 1 Fossil Q Marshal Gen 2 Motherboard Replacement: 手順 3、 2の画像 2

    • Utilize tweezers or a spudger or your fingers to pull the black wire connector from the motherboard.

    • Utilize a spudger to pull the orange connector off of the motherboard.

    翻訳

  5. Fossil Q Marshal Gen 2 Motherboard Replacement: 手順 4、 1の画像 1

    • Utilize tweezers to pull the white battery connector from the motherboard.

    翻訳

  6. Fossil Q Marshal Gen 2 Motherboard Replacement: 手順 5、 3の画像 1 Fossil Q Marshal Gen 2 Motherboard Replacement: 手順 5、 3の画像 2 Fossil Q Marshal Gen 2 Motherboard Replacement: 手順 5、 3の画像 3

    • The internal electronics can now be pulled out of the watch as one unit leaving the screen remaining in the watch housing.

    • Taking the flat end of the spudger, pry it up.

    翻訳

  7. Fossil Q Marshal Gen 2 Motherboard Replacement, Battery: 手順 6、 1の画像 1

    • The battery is secured to the back of the motherboard utilizing a sticky pad. Gently separate the battery from the board while making sure not to put too much stress on the board. This is best done at the location shown.

    翻訳

  8. Fossil Q Marshal Gen 2 Motherboard Replacement: 手順 7、 2の画像 1 Fossil Q Marshal Gen 2 Motherboard Replacement: 手順 7、 2の画像 2

    • Remove battery from plastic housing.

    • Slip wires through large slot in plastic housing to completely remove.

    翻訳

  9. Fossil Q Marshal Gen 2 Motherboard Replacement, Motherboard: 手順 8、 1の画像 1

    • Using your finger remove the metal hooks from the black electronic housing.

    翻訳
終わりに

To reassemble your device, follow these instructions in reverse order.

4 の人々がこのガイドを完成させました。

作成者

1人の作成者と共同作成されました。

Matthew Tucker

メンバー登録日: 11/07/17

580 ポイント

3のガイドは作成済み

バッジ: 12

+9 個以上のバッジ

チーム

IUPUI, Team S2-G5, Harley Fall 2017 IUPUI, Team S2-G5, Harley Fall 2017人のメンバー

IUPUI-HARLEY-F17S2G5

3 メンバー

6のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 10

過去 30 日: 21

今までの合計 2,847