Fitbit Surge GPS Replacement

はじめに

Having trouble with your Fitbit Surge's GPS? Read this guide to learn how to replace the GPS, but keep in mind that you will need to cut the wristband in order to complete this repair and the band cannot be reattached.

必要な工具と部品

手順1 Fitbit Surge GPS Replacement

Fitbit Surge GPS Replacement, Fitbit Surge GPS Replacement: 手順 1、 2の画像 1

Fitbit Surge GPS Replacement, Fitbit Surge GPS Replacement: 手順 1、 2の画像 2

Unscrew all four black 3 mm Phillips screws on the underside of the watch using a T5 screwdriver.

翻訳

手順2

Fitbit Surge GPS Replacement: 手順 2、 3の画像 3

Use an X-Acto knife to cut the band above, on either side, and in between the 2 screws.
Note: Part of the band is hard plastic.
Caution: Once the band is cut it cannot be reattached.

翻訳

手順3

Scrape away the glue beneath the hard shell portion of the band to reveal the GPS.

翻訳

手順4

Use a PH000 screw head to undo the newly revealed 4 mm Phillips screws that were hidden beneath the glue.

翻訳

終わりに

To reassemble your device, follow these instructions in reverse order. Keep in mind that you will need to cut the band for this guide and it cannot be reattached.

3 の人々がこのガイドを完成させました。