Fisher Paykel Neopuff Valve System Replacement

はじめに

NOTE: The valves are an integral part of the valve, panel and manifold assembly and are not able to be serviced. Please specify the model number from the parts list (section 4.1.2) when ordering a replacement valve assembly.

Please reference the parts list below for the disassembly diagram.

Please refer to page 7 of the device’s Technical Manual for source information.

必要な工具と部品

手順1 Valve System

Fisher Paykel Neopuff Valve System Replacement, Valve System: 手順 1、 1の画像 1

Remove the back cover, fixed by four screws.

翻訳

手順2

Disconnect the tube from the manometer.

翻訳

手順3

Remove the manometer by unscrewing the two retaining nuts.

翻訳

手順4

Fit the existing manometer into the new valve assembly panel.

翻訳

手順5

Tighten the retaining nuts.

翻訳

手順6

Reconnect the manometer tube.

翻訳

手順7

Refit the front panel to the back cover with the four screws from step 1.

翻訳

手順8

Carry out the valve system performance test described above. It is recommended to record the lot number of the new valve assembly onto the Set-up and Maintenance Checklist.

翻訳