Fiat 500 Abarth Taillight Replacement

はじめに

This guide is for owners of the Fiat 500 Abarth who are unsure about how to replace the rear taillight and the bulbs within it. Taillights are extremely important and legally needed in most places, so it is always important to ensure that yours are always working. When a bulb burns out, you lose one of your lights that tells other drivers what you are doing which can be very dangerous on the road, so it is best to fix them as soon as possible. There are very few hazards in this process, however the biggest advice to offer is to take each step slowly and carefully, making sure you stick to the directions as much as possible. To add on to that, make sure to read through the directions fully before starting, and read each step all the way through before beginning that step to ensure you are aware of what you need to do and what warnings the step is advising. This is a straightforward process that anyone should be able to complete with little issue. Time to get started on the project!

必要な工具と部品

手順1 Fiat 500 Abarth Taillight

Fiat 500 Abarth Taillight Replacement, Fiat 500 Abarth Taillight: 手順 1、 2の画像 1

Fiat 500 Abarth Taillight Replacement, Fiat 500 Abarth Taillight: 手順 1、 2の画像 2

Remove the two 10 mm bolts to the side of the taillight.

翻訳

手順2

Using a pry tool or something flat, carefully get in-between the light and the car and pry the light off.
The light still has cable connections to the car body, so be sure not to rip these during removal.

翻訳